Lanberg NC Series Quick Installation Manual page 9

Quick Installation Guide
Wi-Fi USB network adapters
1) Important pre-recommendations and information regarding Wi-Fi USB network
adapters usage
1.1) Introduction
PLEASE KEEP THIS MANUAL – set of recommendations and user manuals for wireless network adapters,
detailing the models supported below:
•
NC-0150-WI, NC-0150-WE
•
NC-0300-WI, NC-0300-WIE
•
NC-1200-WI
contains logistics and technical data, instructions and regulations that must be adapted and followed
during transport, assembly, use and maintenance of above mentioned products. Do not use the device
before carefully reading and adhering to all the information and safety precautions contained in the user's
manual. Keep this manual for later use. All photos, drawings contained in the manual are for reference
purposes only.
NOTE: For the most up-to-date version of this manual, please visit our website at www.lanberg.eu.
1.2) Contents of the package
•
Wi-Fi USB network adapter (NC-0150-WI, NC-0150-WE, NC-0300-WI, NC-0300-WIE, NC-1200-WI),
•
Quick installation guide,
2) Installation of the device and drivers
2.1) Connecting a Wi-Fi USB network adapter
Connect the device to any USB compatible port on your computer / laptop or any other device that
supports the following operating systems:
•
Windows: Vista, 7, 8, 8.1, 10
•
Mac OS: 10.9 ~ 10.3
NOTE: Never use force to insert a network adapter. If it cannot be plugged-in, turn it over and try again.
For best performance in a wired connection between the network adapter and the receiving device, use a
USB port that conforms to version 2.0. The NC-1200-WI model should be connected to the USB 3.0 port.
Otherwise it will not be possible to get the highest possible (practical) speeds.
E-mail: support@lanberg.pl
www.lanberg.pl
Lanberg © 2015-2019
PL | EN
9 | 13