Sony XBR-65X930C Service Manual page 101

1-2. XBR-75X940C/945C
1-2-44. GASKET (BMF)
Stick GASKET inside the guide line.
Caution:
1. Please aim at the center of square land.
2. Assy the gaskets just before B board panel installation.
XBR-65X930C, 75X940C, 945C
GASKET (BMF)
Guide line
*No indication of direction
NOTE:
When you replace a BMFW board, it is necessary to stick five
new GASKET on a new BMFW board.
GASKET (BMF): 4-566-117-01
GASKET (BMF)
But in below cases, GASKET is not necessary.
GASKET is soldered onto the surface of the board
In case below number is printed on the surface of the B-board
(Please note that this is not the P/N of mounted board)
To stick the GASKET firmly,
Press the gasket until compression completely.
(0.5-1.0kgf)
DISASSEMBLY
"1-894-595-12 or 22"
101