Jack-Net Board Block-1 (X7Cd/X7Cdb) - Sony CMT-X5CD Service Manual

CMT-X5CD/X5CDB/X7CD/X7CDB
Ver. 1.1

2-14. JACK-NET BOARD BLOCK-1 (X7CD/X7CDB)

• Continued on 2-15 (page 27).
connector
(CN2201)
JACK-NET
main
board
chassis
guide line
cushion (power B) MAIN board
5 connector
(CN2201)
7 PWB cushion (JACK)
guide line
cushion
(main PWB)
MAIN board
26
FFC cushion (USB)
JACK-NET board
8 cushion
(power B)
JACK-NET
cushion (jack)
board
PWB cushion (JACK)
Note 5: Pass the wire over the
cushion (main PWB).
Note 2: When installing the flexible flat cable, ensure that
the colored line is not slanted after insertion.
OK
Insert is straight to the interior.
flexible flat
cable
colored line
connector
4 FFC cushion (USB)
3 flexible flat cable (21P)
(CN1502)
6 cushion (jack)
1 connector
(CN1504)
2 flexible flat cable (15P)
(CN507)
Note 1: When you install the connector, please install them correctly.
There is a possibility that this machine damages when not
correctly installing it.
OK
Insert is straight
Insert is shallow
to the interior.
connector
connector
connector
NG
Insert is incline
flexible flat
cable
colored line
connector
Note 3: Press the wire into the
JACK-NET board.
JACK-NET
CN1504
board
flexible flat cable (15P)
(FFC10)
JACK-NET MAIN
board board
Note 4: Press the insertion in the
direction of the arrow.
NG NG
Insert is incline
connector
connector connector