Cleansing
1
Moisten your skin. Suffi cient moisture must be present
throughout the treatment.
2
Select Cleansing mode. The Cleansing control lamp (5)
lights up constantly.
4
Start with the side neck area (1.) and then work your
way gradually from the chin over the cheeks up to the
forehead (2. – 7.).
5
After around 2.5 minutes, switch to the other half of the
face and perform the same treatment.
6
Wash your face thoroughly after the treatment and apply
your facial care.
If you would prefer gentle cleansing rather than
intensive cleansing of your face, then place the pimple
attachment (2) on the sonic head before the treatment.
3
Place the sonic head (9) on
your skin and guide it over the
skin applying slight pressure.
Note the application direction
and application sequence (see
"Application Sequence")!
EN
35