Table of Contents
Summary of Contents for Integra Luxtec DLX UltraLite Pro
- Page 1 Integra Luxtec ® ® OPERATION AND SERVICE MANUAL DLX UltraLite Pro Camera System ® Integra Luxtec DLX UltraLite Pro Camera System ® ® ® For use with high power surgical light sources such as Integra Luxtec MLX 300W system.
-
Page 2: Table Of Contents
Integra Luxtec ® ® DLX UltraLite Pro Camera System ® Table of Contents Indications for Use .......................................2 Contraindications .........................................2 Symbols ..........................................3 General Warnings .........................................4 DLX UltraLite® Pro Camera Control Unit (CCU) Assembly ..........................4 DLX UltraLite® Pro Camera Overview Inspection Before Use ....................................5 Installation of CCU to Floor stand (optional) ............................ -
Page 3: Indications For Use
Integra Luxtec ® ® DLX UltraLite Pro Camera System ® Symbols CAUTION: FEDERAL (USA) LAW RESTRICTS THIS DEVICE TO SALE BY OR ON THE ORDER OF A PHYSICIAN. Found on a medical grade light source, other illumination related equipment, fiber optic cables and corresponding packaging. -
Page 4: General Warnings
Integra Luxtec ® ® DLX UltraLite Pro Camera System ® General Warnings DLX UltraLite® Pro Camera Overview The user should carefully study the Operation and Service Manual before using the equipment in a clinical environment. This Manual contains information about the proper procedures for preparing this product for its use and care. Instructions should Inspection Before Use be followed, with special attention given to warnings, controls and user specifications. -
Page 5: Set-Up For Use
If you still do not have a picture, turn OFF the camera power and check all of your connections on the camera, recording device, printer, and monitor. Turn the camera power back on. If you still do not have a picture, please contact your local Integra sales... -
Page 6: White Balance
Increase light output per light source user instructions Temperature Operating: 5-40°C If you are still having issues with your system after following the above troubleshooting tips, please contact your local Integra sales representative Storage: 0-50°C Relative Humidity Operating: 10-85% (Non-Condensing) -
Page 7: Ordering Equipment
Ordering Equipment Electromagnetic Compatibility To place an order, contact your local Integra distributor or call Integra customer service at The information contained in this section (such as separation distances) is specifically written with regard to the 1-800-431-1123 (USA) or +1-914-789-7094 to identify your local distributor. - Page 8 Integra Luxtec ® ® DLX UltraLite Pro Camera System ® Electromagnetic Immunity This equipment is intended for use in the electromagnetic environment specified below. This equipment is intended for use in the electromagnetic environment specified below. The user of this equipment should assure that it is used in such an environment.
-
Page 9: Limited Warranty
DLX unit All repairs to the DLX Camera System must be performed by Integra. This device must be cleaned prior to return to Integra. Refer to cleaning instructions on page 9 of this manual. Integra reserves the right to return unrepaired any equipment that is not cleaned free of blood or other organic material. - Page 10 914-789-7094 outside USA 914-592-8056 fax integralife.com Integra, the Integra logo, Luxtec and UltraLite are registered trademarks of Integra LifeSciences Corporation or its subsidiaries in the United States and/or other countries. Copyright ©2016 Integra LifeSciences Corporation. All rights reserved. LAB-0000026-YK REV. AA 0572326-1...
Need help?
Do you have a question about the Luxtec DLX UltraLite Pro and is the answer not in the manual?
Questions and answers