Shield, Side Jack Bracket, Bm Board Or Bm4 Board And Rf Bracket Removal - Sony KDL-26M4000 Service Manual

1-4. SHIELD, SIDE JACK BRACKET, BM BOARD OR
BM4 BOARD AND RF BRACKET REMOVAL
NOTE: Refer to the position of the RF Connector on the tuner to determine if the model has a BM Board or a BM4 Board.
1 Release hook and slide out Side Jack Bracket from BM Board or BM4 Board
(NOTE: You can easily determine if you have a model with a BM Board or a BM4 Board by looking at the tuner. )
2
Remove 2 screws, +BVST 3X8 (BM Board Only)
3
Remove Hexagon Washer Nut from PF Cable (BM Board Only)
4
Disconnect 5 connectors
5
Remove 2 screws, HEX
6
Remove 2 screws,
+PSW M3X5
7
Remove 7 screws,
+BVST 3X8
KDL-26M4000/32M4000/37M4000/40M4000
Main Bracket
1
Side Jack Bracket
3
RF Bracket
4
2
BM Board
Refer to the position of the RF Connector on the tuner to determine
if the model has a BM Board or a BM4 Board.
7
Shield
4
BM4 Board
6
5
BM BOARD
KDL-26M4000/32M4000/37M4000/40M4000
7
Shield
6
5
BM4 BOARD
14