Review Previous Results; Deleting All Results History; Creating A Pdf Report - Micro Direct Spiro Operating Manual

Reviewing Previous Results
The Spiro lung monitor can store up to 200 test sessions. In
order to view previously performed test sessions, follow these
steps:
1. Turn the device on.
2. When the device is ready for a test
button for approximately 3 seconds.
3. The most recent test session will now be displayed. The best
FEV1 result will be displayed for approximately 3 seconds,
followed by the best FEV6 result. The session number '1' is also
displayed, this is the latest session.
4. Earlier test sessions can also be viewed. Pressing the
once will show '2' the previous test, and so on.
5. Press "Enter" button. The device will return to the test screen.

Deleting All Results History

Caution: Once the history has been deleted it cannot be
recovered.
To delete the history entirely, i.e. all previously stored session
results, follow these steps:
1. Turn the device on.
2. When the device is ready for a test
"Enter" buttons simultaneously for approximately 10 seconds.
3. A long beep will indicate success and the device will return to
the test screen.

Creating a PDF Report

The test session may be transmitted to the Reports Utility on your
PC where it can be stored as a PDF file and viewed or printed.
Before you can transmit you must first have the Reports Utility
installed and running on your PC.
, press the "Enter"
, press the
6

button

and