Advertisement

Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
28
44
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.artiqua.de
Connection to power supply should be carried out only by a qualified technician
and according to both IEC60364 and national regulations in force!
CAUTION
NOTICE: Technical changes and errors reserved! Latest status at www.artiqua.de
13.11.2017
818-WU2L-1-10_818-MMWTR51-10
Waschtisch= 1010
Wandhaken= 934
Sicherungswinkel= 902
Gesamtbreite= 990
Diese Hinweise dienen der Vermeidung von Sach- und Personenschäden
Bei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.
• Die Montage muß durch fachkundiges Personal erfolgen.
• Beachten Sie die beiliegenden Montageanleitungen.
• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
These instructions are intended to prevent personal injury or property damage.
We will not be held responsible in case of disregard.
• Assembly must be carried out by skilled personnel.
• Take notice of enclosed installation instructions.
• Assemble the included additional safety brackets for vanity base cabinets.
www.artiqua.de
28
44

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 818 and is the answer not in the manual?

Questions and answers

Summary of Contents for ARTIQUA 818

  • Page 1 • Beachten Sie die beiliegenden Montageanleitungen. • Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.artiqua.de Connection to power supply should be carried out only by a qualified technician and according to both IEC60364 and national regulations in force! CAUTION These instructions are intended to prevent personal injury or property damage.
  • Page 2 818-SFU-3-10 Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen drilling point for screw hooks, dimensions for mounting and drain Wandhaken 865 Gesamtbreite 1000 Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen! Diese Hinweise dienen der Vermeidung von Sach- und Personenschäden VORSICHT Bei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung .

This manual is also suitable for:

818-sfu-3-10

Table of Contents