Awoco TZ-6001 Installation Manual

Note: consult with your electrical professional for electrical connection. 120VAC
connection might require hard wired.
Awoco Air Curtains: Cut the connection nut off
the dedicated 2 wires for door switch, extend and
connect the wires to the micro switch's NC and
COM poles.
Other brands' air curtains: Cut the power cord's
Hot wire (usually black color) and connects to the
micro switch NC and COM poles.
The air curtain should be installed indoor, follow the below diagrams for the recommended
installation.
Door Type
Outward swing doors
If the door swings outward, mount the micro
switch on the side of the door frame or the
upper side of door frame.
Inward swing doors
If the door swings inward, please use metal
sheet to create the brackets (not included) to
install the micro switch.
In & out swing doors
If the door swings in and out, please place
the roller plunger micro switch on the upper
side of the door frame with a metal bracket
(not included) mounted on the top of the door.
Middle ended sliding doors
If double sliding doors ended in the middle,
please place the plunger micro switch on the
upper side of the door frame with a metal
bracket (not included) mounted on the top of
the door.
Plunger Micro Switch Installation Manual
Power Input
Power Input
Installation Diagram
Visit www.awoco.com
Ground
120V AC
Neutral
Ground
120V AC
Neutral
Hot
Plunger Micro switch
for more information
Awoco
Air Curtain
Hot
NC NO COM
Plunger Micro switch
Other Brands
Air Curtain
Hot
NC NO COM
Applicable Installation
Micro Switch Difficulty
Models
TZ-6001
TZ-6003
TZ-6001
TZ-6003
TZ-6003
TZ-6001
TZ-6002
TZ-6003
Rating
Easy
Medium
Hard
Easy