Table of Contents
Advertisement
g) Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only be performed by the manufacturer or
authorized service providers.
7) Basic Safety Rules
a) Use the correct tools.
Only use the tools and accessories listed in the operating instructions. Do not
use electric tools for purposes or work they are not intended for.
b) Secure the workpiece.
Use clamping devices or a vice to hold the workpiece. It is held more securely
than it would be by hand and both your hands are free to operate the tool.
c) Leave protective equipment in place.
d) Hand-held devices must not to be used as stationary equipment.
e) Do not hold the device in the compression area.
f) Do not hold any body parts or foreign objects between the press jaws
when activating the pressing cycle. Do not hold the jaw lever during the
pressing cycle. Danger of crushing!
There is a danger of crushing the fingers and hands.
g) Observe the safety instructions for the use of cleaning and corrosion
protection agents.
h) Ensure that the workpiece is not under tension.
2.2 Intended Use
Thebatterychargerissuitableonlyforusewithcompatible18Vlithiumion
rechargeablebatteries(seetypelist).Thebatterychargerdoesnotrequireany
adjustments.
Thebatterychargercanbeoperatedwitheither100–240VAC(householdpower
connection)or12VDC(e.g.,inacar).
ProductInformation
9
US
Advertisement
Table of Contents
