General Safety Recommendations; Installation - Beamz 153.106 Instruction Manual

GENERAL SAFETY RECOMMENDATIONS:

- Read the manual prior to using the unit.
- Keep the manual for further reference.
- Keep the packaging so that you can transport the unit in its original packaging in order to avoid
damage.
- For indoor use only. Do not use the unit in a humid environment.
- When mounting the unit, leave enough space for ventilation.
- Do not use the unit close to heat sources or under direct sun light.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains
outlet.
- Make sure that no liquids or small components can enter the housing.
- Use a damp, dust-free cloth to clean the unit. Do not use cleaners or solvents!
- The unit doesn't contain user serviceable parts.
- Keep out of the reach of children.
- The unit should only be repaired by a Tronios approved repair service.
- FIRE HAZARD: install the mirror ball with motor at a distance of at least 0.5m from inflammable
materials (decoration material and others).
- DANGER: Before the first use of an mirror ball and a motor, the installation needs to be checked
by a qualified person.
- The motor and mirror ball combinations needs to be checked at least once a year by a qualified
person.
- Regularly check the chain between the motor and the mirror ball, including the connection points
on the motor and the mirror ball.
- Only use appropriate material for the installation of the motor.

INSTALLATION:

NOTE: Follow the instructions carefully and use your brains when mounting the motor and mirror ball.
A falling mirror ball can cause serious injuries !!
- The installation must be done in such a way that it can support 10 times the weight of the mirror
ball for at least 1 hour without showing any distortion.
- The motor needs to be installed perfectly horizontally. Check the position with a level.
- Motor and mirror ball must be installed out of the reach of persons.
- Use all screw openings in the housing.
- Use a chain of sufficient strength for the installation of the mirror ball below the motor. The
supplied chains are made to the load of the motor.
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual.
Tronios BV cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
UK