Page 1
Anti Theft Operation & Installation Guide...
Page 2
On initial power up WiTi Anti-Theft needs to be initialised. To do this press the button on the remote control and the lights will flash once. The system is now initialised. This only needs to be done on power up. If power is removed from WiTi Anti Theft then the system needs to be initialised again.
Page 3
Do not operate WiTi unless you have read and understood this manual and WiTi is installed as per the instructions. • Ensure the cable used to install WiTi is of adequate thickness to provide the necessary current for the circuit. •...
Page 4
Right Indicator Green Brake Light WiTi Anti Theft can be installed in any area that makes practical sense, typically next to Driving Lights Brown or near the battery in the caravan or trailer.
Need help?
Do you have a question about the Anti Theft and is the answer not in the manual?
Questions and answers