Advertisement
Quick Links
Decorative Lighting – Floor Recessed Series
China Factory: Block 5, Lianjian Science &
Technology lndustrial Park, Crossing of Huarong
Road, Dalang Sub-District, Longhua, ShenZhen
City, Guangdong, China
Tel: (86) 755 2344 6211
Fax: (86) 755 8601 9193
User Manual
HK Office: Unit 1901, 19
No. 57 Hung To Road, Kwun Tong, Kowloon,
Hong Kong
Tel: (852) 3152 3059
Fax: (852) 3152 3039
th
Floor, NanYang Plaza,
Advertisement
Summary of Contents for Dilux AP6528
- Page 1 User Manual Decorative Lighting – Floor Recessed Series China Factory: Block 5, Lianjian Science & HK Office: Unit 1901, 19 Floor, NanYang Plaza, Technology lndustrial Park, Crossing of Huarong No. 57 Hung To Road, Kwun Tong, Kowloon, Road, Dalang Sub-District, Longhua, ShenZhen Hong Kong City, Guangdong, China Tel: (852) 3152 3059...
- Page 2 Contents I. Installation Guide 1) AP6528 Installation Guide ① Surface Mounted 2) AP2811 / AP2011 Installation Guide ① Trim/ Trimless Recessed II. Cutting Instruction III. Precautions (Storage, Warranty, Frequently Asked Questions)
- Page 3 Installation Guide （ AP6528 ） Surface mounted 2. Assemble the two end caps at the two ends of 1. Attach the strip light to the inner bottom of the the aluminum profile with screws. aluminum profile, and then cover with the PC cover.
- Page 4 Installation Guide （ AP2811 / AP2011 ） Trim / Trimless Recessed 1. Attach the strip light to the inner bottom 2 Cover with the PC cover, then fix the two end caps of the aluminum profile, and then cover with at the two ends of the aluminum profile with screws.
- Page 5 Cutting Instruction According to the length of the multiple of the strip light minimum cutting unit, measure the aluminum profile and mark the area need to be cut, and the cutting blade is biased toward the portion to be cut. 2.
- Page 6 Precautions Use Maintenance During the installation, ensure the wire is connected properly base on the marking of the wire end and the electricity operation is prohibited. Electronic components such as power supplies are strictly prohibited from being disassembled; The lighting fixture should be wiped and maintained regularly. It is recommended to maintain once or twice a quarter.
- Page 7 Frequently Asked Questions Q: Some parts of the linear light are not bright? A: If it is not bright in some parts, there should be defect of LED chip of the LED strip. It is recommended to replace the defected LED strip.
Need help?
Do you have a question about the AP6528 and is the answer not in the manual?
Questions and answers