Xo SINK PRO NANOGRIND Operating & Installation Instruction Manual

Twist lock mount

Advertisement

SINK PRO
BEFORE YOU BEGIN:
NOTE:
Your XO Food Waste Disposer has been designed exclusively for residential use,
for operation on 120V 60 Hz US household current only
Any other use will void warranty and may constitute a hazard.
IMPORTANT:
Read All Instructions Thoroughly Before Installing or Using the Disposer.
CAUTION:
Make Certain to Review Instructions Pertaining to RISK, FIRE, ELECTRIC SHOCK
or PERSONAL INJURY Prior to Use.
RECORD YOUR MODEL # & SERIAL NUMBER HERE:
*MODEL #
*The above information appears on the label affixed to the bottom of the disposer.
For your convinience, write down the model number and serial number prior to installation.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using electrical appliances, basic safety precautions must always be followed,
including:
1.
Use this appliance for its intended purpose only as described here in the manual.
2.
Read all instructions prior to use.
3.
To reduce the risk of injury, closely supervise children when the appliance is in use.
4.
NEVER
put hands or fingers into a waste disposer.
5.
Turn off power switch AND unplug power cord
object from the disposer.
6.
When attempting to loosen a jam in a waste disposer, use a long wooden object such as the
handle of a wooden spoon.
7.
When attempting to remove objects from a waste disposer use only long handled tongs or pliers
to avoid reaching in.
8.
To reduce risk of injury by materials that may be expelled by a waste disposer,
Drain Cleaners, China, Glass, Plastic, Metal, Large Bones, Hot Grease, Hot Liquids or other
hazardous materials into the disposer.
9.
When not operating the disposer - leave the stopper in place to reduce the risk of objects falling
into the disposer.
10.
NEVER
operate the disposer without the splash guard in place.
11.
The disposer
MUST be
manual.
12.
If the supply cord is damaged, it
authorized person in order to avoid hazard.
NANOGRIND
properly grounded - see the ELECTRICAL CONNECTION section of this
MUST be replaced
TWIST LOCK MOUNT
OPERATING & INSTALLATION
INSTRUCTION MANUAL
*SERIAL #
before attempting to clear a jam or remove an
by the manufacturer, its service agent, or an
www.xoappliance.com
NEVER put:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SINK PRO NANOGRIND and is the answer not in the manual?

Questions and answers

Summary of Contents for Xo SINK PRO NANOGRIND

  • Page 1 INSTRUCTION MANUAL BEFORE YOU BEGIN: NOTE: Your XO Food Waste Disposer has been designed exclusively for residential use, for operation on 120V 60 Hz US household current only Any other use will void warranty and may constitute a hazard. IMPORTANT: Read All Instructions Thoroughly Before Installing or Using the Disposer.
  • Page 2: You Will Need

    BEFORE YOU BEGIN ELECTRICAL CONNECTIONS: All electrical connections must comply with the National Electrical Code, Section 422 and/or local codes and DANGER Read Save Observe Note To Installer: Note to Consumer: Proper installation is the responsibility of the installer - product failure due to improper installation is not YOU WILL NEED: Philips &...
  • Page 3 FAMILIARIZE YOURSELF WITH HOW THE DISPOSER ASSEMBLES STOPPER SAFETY FEED GUARD (Only used on Continuous Feed models) (Only used on Batch Feed models) SPLASH GUARD SINK FLANGE RUBBER FLANGE GASKET SINK (cutaway) FOAM RUBBER GASKET (hard plastic side down) SUPPORT RING (note arrows indicating up) MOUNT RING TIGHTENING EARS CUSHION MOUNT RING...
  • Page 4 HOW THE SINK FLANGE ASSEMBLES SINK FLANGE THIN RUBBER GASKET or PUTTY SINK FOAM RUBBER GASKET (plastic side facing down) SUPPORT RING SINK FLANGE GROOVE MOUNT RING CUSHION MOUNT RING CUSHION MOUNT GROOVE AFTER ENSURING THAT THE SEALING SURFACE OF THE SINK IS COMPLETELY CLEAN: 1.
  • Page 5: Optional Accessories

    OPTIONAL ACCESSORIES: MOUNT ADAPTOR: Part # XODISEADAPTER The Mount Adapter is designed to help you retrofit three bolt mounting systems when the existing hardware will be re-used. It can only be used with CONTINUOUS FEED Disposers. In this case after the old disposer is unbolted, the Mount Adapter is bolted into place and the Mount Ring and Cushion Mount are used to connect the disposer following the installation instructions starting at STEP (h) on the opposite page.
  • Page 6 PREPARE THE DISPOSER FOR INSTALLATION IF YOU ARE USING THE DISPOSER WITH A DISHWASHER: 1. Remove the knock out plug from the housing. Using a hammer and a blunt instrument such as a wooden dowel or a metal pin punch knock out the entire plug as shown. DO NOT USE A SHARP TOOL, such as a screwdriver.
  • Page 7 CONNECTING THE DISPOSER TO THE SINK FLANGE 1. ATTACH TO THE SINK FLANGE. Lift the Disposer into place and rotate the Mount Ring until the slots in the Mount Ring line up with and drop over the lugs protruding from the hopper. 2.
  • Page 8: Common Installations

    COMMON INSTALLATIONS It is essential for proper operation that the Disposer drain completely when not in use. For that reason, minimum distances “A” between the bottom of the sink and the drain outlet must be maintained. BATCH FEED MODELS - minimum height clearance 10” CONTINUOUS FEED MODELS - minimum height clearance 8”...
  • Page 9: Important Note

    OPERATION - CONTINUOUS FEED DISPOSERS 1. Remove the sink stopper and turn on a medium flow of cold water. 2. Turn the switch “ON”. 3. Scrape in food waste. 4. Disposal process can be speeded up by breaking up larger bones, cobs and rinds. Large bones, fiberous husks and similar waste may be more easily disposed of as trash.
  • Page 10: Troubleshooting

    CARE & MAINTENANCE TIPS FOR SUCCESSFUL OPERATION: 1. Be sure the disposer is empty before running dishwasher for proper drainage. 2. Leave stopper in when not in use to prevent foreign objects from falling into the disposer. 3. Non Food items such as plastic, glass, metal, clam/oyster shells, rubber, string, feathers, china, leather, cloth, etc.
  • Page 11 WARRANTIES In addition to the best warranties in the industry XO products are backed by our unique 90 Day Love It or Leave It warranty. For 90 Days, all our products are backed by our unique Love It or Leave It Guarantee...

Table of Contents