Lindy 70576 Manual

Low Profile
PCI Card 2P EPP/ECP
LINDY Art. Nr. 70576
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - APR 2001
English Manual
Low Profile PCI Card 2P EPP/ECP

Description

The 70576 32Bit PCI bus Plug & Play 2P I/O card is equipped with two ECP/EPP/SPP/BPP IEEE 1284 Centronics
Parallel Interfaces. It includes two 25 pin female connectors for peripherals' units with IEEE 1284 Centronics Parallel
Interface.

Hardware Specification

Parallel Port:
Parallel Chipset: SUN1888, Hardware FIFO: 32Byte FIFO
Compatible chips: with ACC3203, ST-78C36 and HT6535.
IEEE standard: ECP/EPP/SPP/BPP (PS-II) Interface
Max. Speed: up to 2.7MB/Sec

Hardware Installation

½
Turn off the power of your computer
½
Plug the 70576 Parallel Adapter to the PCI bus of your computer
½
Connect the peripheral Printer, Modem, Scanner... etc. to this adapter
½
Turn on the power of your computer
PCI device listing display (for example...)
Bus No Device No Func. No
0 7
0 13
When Vendor ID, Device ID, Device Class or IRQ aren't displayed or an error occurs, please change
the PCI slot. After correct hardware installation you can start installing the software from the driver CD.
Vendor ID Device ID
1 8086 7010
0 1409 7268
Device Class IRQ
IDE Controller 14
Simple COMM.
10
Controller