Download Print this page

S.E.A. Group Sundstrom SR700 Quick Start Manual

Powered air purifying particle respirator (papr)

Advertisement

Quick Links

SR700 Particle PAPR — How to
Copyright © 2013 by The S.E.A. Group
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sundstrom SR700 and is the answer not in the manual?

Questions and answers

Summary of Contents for S.E.A. Group Sundstrom SR700

  • Page 1 SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 2 Slide the battery into its position in the respirator fan unit until the lock clicks shut. Use the battery lock tab to undo the battery when you need to recharge it again. SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 3 Turn the hose clockwise until it locks securely. If using the SR700 with the SR200 full face mask, screw the threaded end of the hose into the front of the face piece. SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 4 Insert a coin or similar between the filter rim and the filter adapter and twist the two apart. …attach THREADED filters Screw two identical filters directly into the fan unit. SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 5 Press the button again to return to normal air speed. To turn the fan off, press and hold the button until the motor switches off and the display goes black. SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 6 Do not remove the respirator or head piece! • Leave the area — go to a safe environment with clean air. • Recharge the battery. …perform a functional check SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 7 The following should happen: • The red triangle should flash on the display. +rapid continual beep pulses • A pulsing beep should sound. SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 8 Warm water may give a better clean. Leave to dry and store in a dry, clean area at room temperature away from direct sunlight. SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...
  • Page 9 Simply screw in the threaded plugs into the filter fittings and press the third plug into the bayonet fitting of the breathing hose attachment. Watch this on (using your SmartPhone, tablet or computer) http://youtu.be/QCqmQAlw_uo SR700 Particle PAPR — How to Copyright © 2013 by The S.E.A. Group...