BFBS Eutelsat 10E Manual

Information for Viewers in Europe under Eutelsat 10E who use BFBS Technisat
Receivers
BFBS is carrying out extensive upgrades to our satellite system as part of our contractual commitment to the MoD broadcasting
contract, and a complete explanation of these changes is available at
These upgrades will mean that you will lose your BFBS TV channels at 1000 GMT on the 29
approx) it will be necessary to rescan your BFBS satellite receiver to be able to continue to watch BFBS TV.
To rescan your BFBS Technisat Receiver please follow these instructions
Step 1. After the upgrade at at 1000 GMT on the 29
January has happened you will see this No Signal screen
Press MENU on the BFBS Satellite Receiver remote
control.
Step 3. You will then see this menu screen
Press the down arrow until Transponder is highlighted and
press OK
www.bfbs.com/rescan
th
Step 2. You will then see this menu screen
Press OK to select Channel search
Step 4. You will then see this menu screen
Press up/down arrow button until Symbol rate (KSps) is
•
highlighted, it will show 27500
Change this value to 30000 using the numerical keypad. When
•
you enter the last digit, the highlighted area will change
automatically to Modulation
With Modulation highlighted press OK and you will have the
•
choice of DVB-S or DVB-S2
Use the up or Down arrows to highlight DVB-S2 and press OK
•
th
January, and after this time (1100GMT
............Please Turn Over