Download Print this page

Sealey CAR3000LR Instructions page 2

Car ramps low entry 1.5tonne capacity per ramp 3 tonne capacity per pair

Advertisement

4.
OperatiON
4.1.
raising (Apply section 1 safety instructions)
4.1.1. Push the ramp as far as possible under the tyres of the wheels to be raised.
4.1.2. Run the vehicle onto the ramps carefully, preferably being observed by a second
person.
4.1.3. When the wheel sits in the dished portion of the ramp, immobilise the vehicle.
4.1.4. Proceed to jack the vehicle up, applying the safety details which apply to the jack.
cautiON: If working under the vehicle, ensure that it is supported by suitably rated
axle stands.
4.2.
Lowering
4.2.1. Ensure that the ramps are in place beneath the wheels before lowering the jack.
4.2.2. Ensure that the area beneath the vehicle is clear before lowering the jack.
eNvirONMeNt prOtectiON
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and disposed
of in a manner which is compatible with the environment. When the product becomes
completely unserviceable and requires disposal, drain any fluids (if applicable)
into approved containers and dispose of the product and fluids according to local
regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data,
specifications and component parts without prior notice.
important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, Kempson Way, suffolk Business park,
01284 757500
© Jack Sealey Limited
Bury st edmunds, suffolk. ip32 7ar
01284 703534
www.sealey.co.uk
Original Language Version
sales@sealey.co.uk
CAR3000LR Issue:2 (1,2,3,4) 24/04/18

Advertisement

loading