Table of Contents
Advertisement
30
Troubleshooting - Error Messages
I keep getting one of the following error messages:
Equipment Configuration Error
This error occurs when the CMOS settings have been
changed to a configuration that prevents successful
boot-up. Press the Ctrl + Alt + Esc keys, after the beep
during the boot process, then select Restore Default Settings
to restore the original CMOS values.
CMOS Battery Error
Call Acer Technical Support.
CMOS Checksum Error
Press the Ctrl + Alt + Esc keys, after the beep during the
boot process, then select Restore Default Settings to restore
the original CMOS values. If the error message continues,
call Acer Technical Support.
Diskette Drive Controller Error or Not Installed
Call Acer Technical Support.
Diskette Drive Error
Diskette may be defective. Verify with a known good
diskette.
Diskette Drive A: Type Mismatch
Press the Ctrl + Alt + Esc keys, after the beep during the
boot process, then select Restore Default Settings.
Hard disk Controller Error
Call Acer Technical Support.
Advertisement
Table of Contents
Troubleshooting
