Troubleshooting - Sencor SVC 7PE User Manual

TROUBLESHOOTING:

Before you decide to contact an authorized service centre, please read these following tips in the
troubleshooting chart:
Problem
The engine will not start
The suction output is
insufficient
The power cord is not wound
in completely
The power cord cannot be
pulled out
The speed control is not
working
The power cord starts to wind
in when you do not required .
Copyright © 2017, Fast ČR, a.s.
Vacuum Cleaner
SVC 7PE
Possible cause
- The power cord is not firmly
inserted in the socket
- The wall power outlet is
damaged
- The vacuum cleaner is not
switched on
- The product is clogged
- The dust filter needs cleaning
- The filter is clogged
The power cord may have slipped
down from the winding pulley
during winding .
The power cord is wound up
incorrectly
The product is broken down
The winding mechanism has
broken down
EN-10
Recommended action
- Insert the plug firmly into the
power outlet
- Inspect the power outlet
- Turn the product on
- Remove the blockage or foreign
object
- Clean the dust filter
- Clean the filter
Hold the power cord during the
winding . Apply slight tension
(by pulling the power cord back)
to the power cord during the
winding process
Press the winding button and try
to rewind the power cord again
Have the product repaired by
technician .
(only by a qualified technician)
Have the product repaired by
technician
(only by a qualified technician)
Revision 01/2017