Subscribe to Our Youtube Channel
Summary of Contents for SnapPad EQ Compact
- Page 1 RV SNAPPAD EQ COMPACT INSTALLATION INSTRUCTIONS 1-866-923-9538 | INFO@RVSNAPPAD.COM | RVSNAPPAD.COM 4J | EQ7SP4...
- Page 2 SnapPad family! Very Important Notes: It is critical that you install the correct SnapPad on the proper foot. Please triple check prior to installing your SnapPads. Permanent damage could result from trying to install on the wrong landing foot, resulting in your warranty being voided.
- Page 3 These slots are for drainage and help with removal should you ever need to take your SnapPads off. • Once aligned, begin lowering your jack. Keep an eye on the landing foot as it extends. Stop extending when the foot is about 2 to 3 inches from the SnapPad. Double check to make sure it is centered and the 4 sides line up with the SnapPad, re-align if necessary and then continue extending the landing gear to complete installation.
- Page 4 • Use your phone or another person to relay the information between the installer and the person working the controls. • Install each SnapPad individually and visually confirm the reinforced lip has engaged on the complete diameter. It is critical your SnapPad has been installed fully and correctly.
- Page 5 RV, trailer, towing or following vehicle) arising from the use or inability to use or install the product. • Use extreme caution when installing and using SnapPad. Origen RV Accessories LTD is not responsible or liable in any way for any indirect or direct injury sustained during installation or future use of the product.
Need help?
Do you have a question about the EQ Compact and is the answer not in the manual?
Questions and answers