Description Of The Components - EBCHQ JY Series Instruction Manual

2. Description of the components

Table 1
Item No. Description
1 Rotatory dies
2 Angle lock
3 Buttons
4 Head plate
5 Handles
Function
Non-interchangeable die for crimping
For lock the head plate
For activate/lock rotating die
For support the die and deliver power
For operating
OPERATING INSTRUCTIONS
Read the entire SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before using this product.
Any parts of the tool cannot be knocked; the tool is dangerous
when the parts is broken.
1. To choose die size, open the handle completely, dies can be rotated by activating the
spring loaded buttons.
2. Press the buttons until the die can be rotated. Adjust the die to the required lug or link
size.
the angle locks snap must be back into position and the dies are
locked securely.
3. A lug or link is crimped when the dies come together.
4. The crimp is completed when the handles are completely closed and the dies touch one
another
Do not crimp lugs to electrical cables that are live or in close
proximity to live circuits. Please note this tool is not insulated.
5. Open the handles to take out the connector for next cycle.