BOSS ILLUMINATION URSA Product Manual

URSA
FLOOD LIGHT

PRODUCT SPECIFICATIONS

Input Voltage : 220-240VAC
Operating Temperature : -10 to 40°C
Material : Aluminium
66 08
IP IK

PARTS INCLUDED

x1
Luminaire
with
integrated
driver
OPTIONAL COMPATIBLE PARTS sold separately
Visor Wireguard Pole clamp
kit
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
Corner wall Surge
bracket protector
09.20
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modified, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.

PRODUCT VARIANTS

Power : 200W
250W
300W
CCT : 5000K
Beam Angle: 60°
110°
A18
A19

ADDITIONAL INFORMATION

1. Luminaire is adjustable.
2. This product is suitable for outdoor use.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high pressure
cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire. These
damages may result in corrosion.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
Dimming : No
1-10V
DALI
www.bia.lighting | sales@bia.lighting