Table of Contents
Advertisement
Quick Links
IMPORTANT: This Guide describes how to set up the LS500 and LS400 (Section I) and get
started on Lumaview 500/400 (Section II). It is important that you follow this Guide.
For assistance, please call 760-298-2355 or email support@etaluma.com.
Etaluma, Inc.
3129 Tiger Run Court, Suite 112
Carlsbad, CA 92010
760-298-2355
Lumascope™ and Lumaview™ are trademarks of Etaluma, Inc.
™2009-2015 Etaluma, Inc. All rights reserved.
Lumascope 500/400
-- Startup Guide --
For Use with
LS500
LS400
Lumascope 500 with (optional) Manual XY Stage
info@etaluma.com
www.etaluma.com
Advertisement
Table of Contents
Summary of Contents for Etaluma Lumascope 500
- Page 1 For Use with LS500 LS400 Lumascope 500 with (optional) Manual XY Stage IMPORTANT: This Guide describes how to set up the LS500 and LS400 (Section I) and get started on Lumaview 500/400 (Section II). It is important that you follow this Guide.
- Page 2 Lumaview 500/400 - ZIP link to start the download and save the folder when prompted. Go to your downloads location and click to open the Lumaview500Install_v(version#).zip file. In the opened folder, you will see the following two files. Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 3 Window is changed to not maximized, the word Lumascope transfers to become the name of the Live Image Window and the upper navigation tabs File, Windows, and Help are now present on the Main Window. Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 4 Check the focus again after 60 minutes. The image should be in focus and imaging can be initiated. (Repeat process as needed). Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 5 A. Starting point conditions 1. Lumaview 500/400 has been downloaded to the computer. 2. The LS500 (Lumascope 500) or LS400 (Lumascope 400) is connected to the computer via the UBS power/communication cable. 3. Lumaview 500/400 is open and the Windows described in Section I.F.2 are visible.
- Page 6 ON position. The light can then be controlled by adjusting the horizontal lever on the condenser front or turning the knob on the phase power cable. Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 7 3. For quick review of your last image, click the folder icon on the top tool bar to launch Windows Explorer, which will open the most recent Destination Folder. Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 8 Compiling time-lapse images into videos 1. Click on the MeGUI Application to open the program (may take several minutes). Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 9 9. An encoding window will open and you will see progress in a green horizontal bar until video is completed and window closes. Close MeGUI window. 10. Video will be saved in the Destination Folder chosen in Section II.J.3 above. Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 10 (replaced the 500/400 version), the 500/400 driver should still be present and you most likely will not see the Device Driver Installation Wizard open. This is because the 500/400 driver (Windows Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
- Page 11 Driver Package – Bitwise Systems QuickUSB) has remained on your computer. We recommend leaving the drivers installed if you may be going back and forth between different Lumascope models. Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com...
Need help?
Do you have a question about the Lumascope 500 and is the answer not in the manual?
Questions and answers