Table of Contents
Advertisement
Quick Links
GRIP Base Connector SHW
Assembly and Operating Manual
Dear customer,
Congratulations!
You have chosen the best product we know how to make with our
30 years of experience and passion for precision.
Please follow the instructions in this manual to
avoid mistakes and save time.
In case you need further information or you have
further requests we will be glad to be at your disposal.
With best regards
Your GRIP GmbH
GRIP GmbH Handhabungstechnik
Alter Hellweg 70
44379 Dortmund, Germany
GRIP Base Connector SHW
Contents
1
2
3
4
5
6
7
8
9
10
Rev. 1.01
Tel. +49 231 96450 01
Fax +49 231 96450 50
Page
2
2
2
2
2
2
3
3
3
4
5
5
5
5
5
6
7
info@grip-gmbh.com
www.grip-gmbh.com
1
Advertisement
Table of Contents
Related Manuals for Grip SHW
Summary of Contents for Grip SHW
- Page 1 GRIP Base Connector SHW Assembly and Operating Manual Dear customer, Congratulations! You have chosen the best product we know how to make with our 30 years of experience and passion for precision. Please follow the instructions in this manual to avoid mistakes and save time.
- Page 2 Connector SHW. 2.2 Intended purpose The Base Connector SHW has been designed as an interface between robot and working table. Furthermore, the Base Connector can also be used in special solutions, automation and also as a general mechanical standard interface. The unit may only be used in the context of its technical specifications.
- Page 3 Wear parts are listed in chapter 8.1. The unit is considered to be defective if its basic function "Lock" is no longer functioning. 4 Scope of Delivery • Base Connector SHW as shown in Image 6 depending on the order number of the upper or lower assembly. 5 Technical Data Behold technical data sheets: TD-BC-SHW_EN...
- Page 4 The upper assembly of the Base Connector is mounted to the base of the robot. The lower assembly is mounted to the working table. If the Base Connector SHW can not be installed directly, adapter flanges can be used. Use screws according to DIN 912 or ISO 4762. The screw- in depth of the screws must be observed.
- Page 5 Keep the mating surface and the moving parts clean and lubricate them slightly. Spare parts and component parts of the Base Connector SHW can be found on our homepage: www.grip-gmbh.com 7.1 Disassembly of the SHW (Behold Image 5) Disassemble the Base Connector SHW.
- Page 6 GRIP Base Connector SHW Assembly and Operating Manual 9 Exploded view Image 5 Image 6 Upper assembly Lower assembly Rev. 1.01...
- Page 7 GRIP Base Connector SHW Assembly and Operating Manual 10 EC - Declaration of incorporation according to the Machinery Directive 2006/42/EC, annex II B The producer / distributor GRIP GmbH Handhabungstechnik Alter Hellweg 70 D-44379 Dortmund, Germany hereby declares that the following products...
Need help?
Do you have a question about the SHW and is the answer not in the manual?
Questions and answers