Page 1
Charging the Lmic batteries Operator Guidance Technical Specification Warranty Palmer Environmental Ty Coch House Llantarnam Park Way Cwmbran NP44 3AW United Kingdom Tel: +44 (0) 1633 489479 Fax: +44 (0) 1633 877857 Email: info@palmer.co.uk Web: www.palmer.co.uk Lmic Operators Guide Issue 1 September 2002...
Page 2
Micro- battery charger switch phone connection connection Top view of the Lmic showing the rotary control for Bottom view of the Lmic showing the trigger switch volume and sensitivity. and the electrical connections for the headphones/ battery charger and microphone.
Page 3
Charging the Lmic batteries Connect the charger lead to the rear connector of the Lmic and connect the charger power lead to the 240V AC supply. The Lmic can then be charged overnight. An optional accessory is the car cigarette lighter adapter that can also be used to charge the batteries.
Page 4
The harder the pipe material, the higher the frequencies detected will be, Press the trigger to operate the Lmic and adjust the and the further from the leak the noise will be detected headphone volume control to a comfortable listening and the harder it becomes to accurately pinpoint the level.
Page 5
Acoustically shielded ground microphone foot, for use in all weather conditions Warranty All equipment is warrantied by Palmer Environmental Ltd to be free from defects in materials and workmanship for a period of one year (unless otherwise stated) from the date of shipment to the original customer. This warranty is only valid if the equipment has been installed and used in the correct manner as described in this manual.
Need help?
Do you have a question about the Lmic and is the answer not in the manual?
Questions and answers