Subscribe to Our Youtube Channel
Related Manuals for MSTRONIC MSE DIN-POE4S Series
Summary of Contents for MSTRONIC MSE DIN-POE4S Series
- Page 1 DIN-POE4S DIN-POE4D 4 Ports Gigabit PoE Injector USER’S MANUAL MSTRONIC CO., LTD.
- Page 2 The polarity of each PoE output can be reversed if you need to reverse the output polarity. This manual will help you to install and setting the PoE injector. 2. Hardware Description Front panel detail the port number is as the diagram shows. MSTRONIC CO., LTD.
- Page 3 No valid input applied, the voltage is larger than 58VDC, or less than 42.5VDC, or the output current over 0.684A limit. *Data Input The left ports 1-4 on the front panel are used for Gigabit Ethernet data input. All four ports with surge protection. MSTRONIC CO., LTD.
- Page 4 VIN3+ PoE 3=VIN3 VIN1+ PoE1/2=VIN1 VIN3+ PoE3=VIN3 VIN4+ PoE4=VIN4 VIN1+ PoE1/3/4=VIN1 VIN2+ PoE2=VIN2 VIN1+ PoE1/3=VIN1 VIN2+ PoE2=VIN2 VIN4+ PoE4=VIN4 VIN1+ PoE1/4=VIN1 VIN2+ PoE2=VIN2 VIN3+ PoE3=VIN3 VIN1+ PoE 1=VIN1 VIN2+ PoE 2=VIN2 VIN3+ PoE 3=VIN3 VIN4+ PoE 4=VIN4 MSTRONIC CO., LTD.
- Page 5 Port 1 Port 2 Port 3 Port 4 * Pin1-2(short pin1 & pin2): RJ45 pair C (pin4 & 5) carry PoE positive voltage. * Pin2-3(short pin2 & pin3): RJ45 pair C (pin4 & 5) carry PoE negative voltage. MSTRONIC CO., LTD.
- Page 6 <3pF (VR = 0V, f = 1MHz, I/O pin to GND) Max. Shut Capacitance < 1.5 pF (VR = 0V, f = 1MHz, Between I/O pins) IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC COMPATIBILITY (EN61000-4) IEC61000-4-4 (EFT) 40A (5/50ns) IEC61000-4-5 (Lightning) 20A (8/20µs) MSTRONIC CO., LTD.
Need help?
Do you have a question about the MSE DIN-POE4S Series and is the answer not in the manual?
Questions and answers