Lynteck ES61 Manual

ES61
MOTION SENSOR
OUTDOOR LANTERN
•
Top Cover
‚
Bulb Holder
ƒ
PIR (Motion Sensor)
INTRODUCTION
Your EVERSPRING MOTION SENSOR OUTDOOR
LANTERN is a unique indoor or outdoor lighting system
for your home or business. At night, the built-in passive
infrared (PIR) motion sensor turns on the LANTERN
when it detects motion in its coverage area. During the
day, the built-in photocell saves electricity by
deactivating the lantern. An adjustable timer lets you
select how long the lantern stays on after activation.
Features :
One exquisitely designed lantern - allows you to install
one 60W incandescent bulb.
Two operation options - let you choose automatic
Operation or manual override based on the ambient light
level.
Note : Read this entire manual before you start to
install the system.

SAFETY PRECAUTIONS

l
Do not install when it is raining.
l
Be sure to switch off power source before installing.
l
Make sure that the power wiring comes from circuit
with a suitable fuse or circuit breaker.
l
Keep minimum 0.8m away from the lighted objects.
l
The unit can be installed only vertically (see the
FIGURE 1a), not horizontally (see the FIGURE 1b)
as shown in the below drawing.
VERTICAL
FIGURE 1a & 1b
IMPORTANT
Some local building codes may require installation of
this product by a qualified electrician.
Check your local codes as they apply to your situation.
If the house wiring is of aluminum,
consult with an electrician about proper wiring
methods.
Before proceeding with the installation, TURN OFF
THE POWER TO THE LIGHTING CIRCUIT AT THE
CIRCUIT BREAKER OR FUSE BOX TO AVOID
ELECTRICAL SHOCK.

CHOOSING A MOUNTING LOCATION

l
For the best results, fix your sensors on a solid
surface, 1.8~2M above the ground.
l
For outdoor installation, a location under eaves is
preferable.
l
Avoid aiming the motion sensor at pools, heating
vents, air conditioners or objects which may change
temperature rapidly.
l
Do not allow sunlight to fall directly on the front of
unit.
l
Try to avoid pointing the unit at trees or shrubs or
where the motion of pets may be detected.
l
Prior to mounting, keep in mind that the motion
sensor is most sensitive to the motion, which is
across the detection field and less sensitive to the
motion, which moves directly towards the detector.
(FIGURE 2)
HORIZONTAL
1