Blichmann Engineering HERMS Assembly Operation Maintenance

Table of Contents

Download this manual

HERMS Coil

Assembly, Operation, & Maintenance

Congratulations on your purchase, and thank you for selecting the HERMS Coil from Blichmann Engineer-

ing™. We are confident that it will provide you years of service and many gallons of outstanding beer. This

manual will familiarize you with the use, assembly, and the sanitation procedures for the product.

PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE FOR

About This Manual:

Warning:

Sections labeled "Warning" can lead to serious injury or death if not followed. Please

thoroughly read these sections and understand them completely before use. If you do

not understand them or have any questions, contact your retailer or Blichmann Engi-

neering (www.BlichmannEngineering.com) before use.

Sections labeled "Caution" can lead to equipment damage or unsatisfactory perfor-

Caution:

mance of the equipment. Please read these sections thoroughly. If you have any ques-

tions, contact your retailer or Blichmann Engineering (www.BlichmannEngineering.

com) before use.

Sections labeled "Important" should specifically be followed to ensure satisfactory re-

Important:

sults with the product.

HERMS Coil Owners Manual - V1

For replacement parts visit blichmannengineering.com/genuine-replacemnet-parts

IMPORTANT SAFETY INFORMATION!

Table of Contents

Need help?

Do you have a question about the HERMS and is the answer not in the manual?

Page 1 HERMS Coil Assembly, Operation, & Maintenance Congratulations on your purchase, and thank you for selecting the HERMS Coil from Blichmann Engineer- ing™. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual will familiarize you with the use, assembly, and the sanitation procedures for the product.
Page 2 This portion of the manual will explain how to mark and drill your kettle to install the HERMS coil. If you have a kettle that has been pre-punched please skip this step. Install the HERMS coil on the opposite side of a whirlpool fitting.
Page 3 Install the HERMS Coil with an adjustable wrenche while holding the coil on the inside. DO NOT overtighten. Operation With the coil installed, heat the HLT and recirculate wort through the HERMS coil. This will allow you to maintain a constant tem- perature.
Page 4 A. Limited Warranty Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required. Blichmann Engineering’s obligation to repair or replace defective materials or workmanship is the sole obligation of Blichmann Engineering under this limited warranty.