Summary of Contents for IXOM Medora GridBee SN 1
- Page 1 GridBee SN 1 Owner's Manual © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com O&M_SN1_10055_20200529...
-
Page 2: Table Of Contents
Warranty About Ixom Ixom combines knowledge and experience from across the water quality spectrum to help solve real-world problems. Whether in Lakes, Stormwater Retention Ponds, Raw Drinking-Source Reservoirs, Water Treatment Plants, Potable Storage Tanks, or Wastewater Treatment Processes, Ixom equipment continues to be at the forefront as the #1 world leader for in-situ water body treatment. -
Page 3: Safety
Most accidents can be avoided by using common sense and concentration on the job being done. Carefully read safety information when you see any safety symbols. © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 1949_10036_20200528 O&M_SN1_10055_20200529 - 1... - Page 4 CAUTION: EDGES MAY BE SHARP AND CAUSE WARNING: ICE SURROUNDING MACHINE MAY LACERATION IF PROPER CARE IS NOT USED. NOT SUPPORT WEIGHT, KEEP CLEAR OF THIN ICE. © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 1949_10036_20200528 O&M_SN1_10055_20200529 - 2...
- Page 5 "OFF" position. The On/Off switch is to be by OSHA. used as the emergency stop. © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 1949_10036_20200528 O&M_SN1_10055_20200529 - 3...
-
Page 6: Package Contents
White Tote Kit Submersible Electric Cord F1 Ventilation Blower, Completely Assembled Torque Bar Assembly (M8 or 1/2” Box Wrench & Socket Wrrench Not Supplied) © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10062_20200221 O&M_SN1_10055_20200529 - 4... - Page 7 (Caulk Gun Not Supplied) (2) Kellem Grip (3) Float Lock Cord Strain Reliefs Clevis Pins Lexel Anti-Sieze Tube Sealant Tube (6) Quick Link (3) Hair Pins © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10062_20200221 O&M_SN1_10055_20200529 - 5...
-
Page 8: Requirements
1770 13.1 3400 1.5 - 2.1 66.2 F1 Ventilation 115 / 230 1.15 5.2 / 2.6 6.0 / 3.0 22.7 / 11.35 Blower © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10076_20200221 O&M_SN1_10055_20200529 - 6... -
Page 9: Electrical
Motor Resistance: 11.5 Ω Motor Resistance: 4.9 Ω 0.8 Amps @ 460VAC / 60HZ / 3-Phase Service Factor: 1.15 Motor Resistance: 43.0 Ω Service Factor: 1.15 © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 2113_10368_20200221 O&M_SN1_10055_20200529 - 7... -
Page 10: Assembly
B) relatively close to directly above the SN1 Spray Unit position. Do not install below tank overflow water level. 3. Make sealed penetration referencing the following diagram: © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10077_20200221... - Page 11 5. Slide the 6” Hose Clamp over the end of the hose, so it is approximately centered over Tube Insert and tighten 6. Leave Torque Bar in the existing collapsed configuration until later when it is deployed through roof hatch 3 & 4 © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10077_20200221 O&M_SN1_10055_20200529 - 9...
- Page 12 Univeral Fixture Assembly, allowing plenty of extra length to splice to exterior power conductors at LB or Disconnect Box shown on Requirements Page. 3. Secure Kellem Grip to interior Universal Fixture Assembly using shared quick link with retrieval chain. © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10077_20200221 O&M_SN1_10055_20200529 - 10...
- Page 13 Quick Link to secure the loop of chain. 3. Run opposite end of Retrieval Chain through roof hatch and connect to the interior side of Universal Fixture using quick link. © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10077_20200221 O&M_SN1_10055_20200529 - 11...
- Page 14 A) expanded all the way out until the square tubing is set inside the float arm channel, B) Insert the Float Lock Pin and Hair Pin to secure the float in the expanded configuration, C) Repeat for other two Floats. 1A & 1C © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10077_20200221 O&M_SN1_10055_20200529 - 12...
- Page 15 6. Finish by tightening the threaded rod nuts so that the two feet are snugly pushing against the tank roof 4 & 6 4 & 5 © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10077_20200221 O&M_SN1_10055_20200529 - 13...
-
Page 16: Final Checklist
Operation Check (While Unit is Running) Reading / Observation Source Voltage Reading Amperage Reading Spray/Air Check Auditory Spray/Air Check Visual © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10080_20200221 O&M_SN1_10055_20200529 - 14... -
Page 17: Operation
For very high motor amperage or tripping breaker, additional checks may be required, such as measuring voltage, current, and taking resistance readings for the electric power leads and motor windings. © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 10081_20200221... -
Page 18: Technical Specifications
• Crate - 72 inch x 48 inch x 48 inch (1.85 m x 1.22 m x 1.22 m) / 400lbs (185 kg) Exact weight and dimensions varies dependent on machine configuration. Certifications - Ixom's potable water products are certified to ANSI/NSF Standard 61, and 372 for lead-free content. Learn more at: www.medoraco.com/std61 Maintenance / Warranty - Limited maintenance. - Page 19 Electrical Requirements - Requires 120VAC or 240VAC for single-phase units, and 208-240VAC or 480VAC for three-phase units, 60Hz power. Each motor is dual voltage and can be wired for either low or high voltage. Ixom recommends secondary disconnect to be located near blower equipment. For three-phase motors, three-phase motor protection is recommended.
- Page 20 Dimension Drawing F1 Ventilation Blower Dimension Drawing (P/N: 100536) © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 2000_10058_20200221 O&M_SN1_10055_20200529 - 18...
-
Page 21: Exploded Parts Diagram
26060640 - 6” NSF Hose 7. PN: 26260640 - Cross Torque Bar Assembly 8. PN: 100459 - SN1 Float Arm 9. PN: 28010000 - Collapsible Float © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 1975_10061_20200221 O&M_SN1_10055_20200529 - 19... -
Page 22: Dimension Drawing
Dimension Drawing Dimension Drawing 18” [0.5m] Minimum Head Space 48” [1.2m] Minimum Operating Depth © 2020 Ixom | www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com 1958_10047_20200221 O&M_SN1_10055_20200529 - 20... -
Page 23: Warranty
Where labor is included, in lieu of sending a factory service crew to the site for minor repairs, Ixom may choose to send the replacement parts to the owner postage-paid and may pay the owner a reasonable labor allowance, as determined solely by Ixom, to install the parts. - Page 24 OSHA to perform the necessary work to install or remove SolarBee and GridBee equipment, and are knowlegeable in the regulations and standards of OSHA. If you feel the need to service your SolarBee or GridBee circulation equipment, please contact Ixom's Customer Service Department at: +1 866 437 8076 ©...
Need help?
Do you have a question about the Medora GridBee SN 1 and is the answer not in the manual?
Questions and answers