Advertisement
Quick Links
EL-M05 Microwave sensor instruction
The sensor is an active motion detector, it
emits
high-frequency
（5.8GHz）and receives their echo. The sensor
detects the change in echo from even the slightest
movement in its detection zone. A microprocessor
then triggers the "switch light ON" command.
Detection is possible through doors, panes of
glass or thin walls.
Important: persons or objects moving towards the sensor are detected best！
NOTE: the high-frequency output of this sensor is <10Mw- that is just one 100
the transmission power of a mobile phone or the output of a microwave oven.
Technical specifications
power supply：220-240V/AC,100-130V/AC
power frequency：50/60Hz
Installation sit： Ceiling mounting
HF system： 5.8GHz CW radar，ISM band
transmission power：<10mW
Rated load: 1200W (220-240V/AC)
800W (100-130V/AC)
detection angle：360°
reach:2-8m（radii.）, adjustable
time setting：8sec to 12min
light control：2~2000LUX
power consumption：approx.0.9W
electro-magnetic
wave
Connection illumination
Connect N, L with power;
Connect N, L' with load.
Light sensor
and
Working LED
th
of
Advertisement
Summary of Contents for Ecosense EL-M05
- Page 1 EL-M05 Microwave sensor instruction The sensor is an active motion detector, it emits high-frequency electro-magnetic wave （5.8GHz）and receives their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the “switch light ON” command.
- Page 2 Reach setting (sensitivity) Reach is the term used to describe the radius of the circular detection zone produced on the ground. After mounting the sensor light at a height of 2.5m, turn the reach control completely in anti-clockwise direction to select minimum reach (approx.1 m radius), and turn the reach control completely 1-10m radii in a clockwise direction to select the maximum reach (approx.
Need help?
Do you have a question about the EL-M05 and is the answer not in the manual?
Questions and answers