Advertisement
Table of Contents
- 1 Disable the SIM Card’s PIN Code Query
- 2 Insert SIM Card into the Modem
- 3 Attach the DIN Rail Adapter
- 4 Mount the Modem with Attached Rail Adapter
- 5 Remove the Protective Caps from Antenna Connectors
- 6 Connect the USB Cable
- 7 Check the LED Status Indicator
- 8 Check Modem Compatibility
- Download this manual
EC DECLARATION OF CONFORMITY
Manufacturer: Tosibox Oy, Teknologiantie 12A, 90590 OULU, FINLAND.
We hereby declare under our sole responsibility for the below listed,
CE marked product:
TOSIBOX
4G Modem, with product code TB4GM2EU, TB4GM2AU or TB4GM8EU,
®
is in conformity with the essential requirements of the European Directives:
2014/53/EC
2011/65/EC
The product has been tested against the following standards
and specifications.
Art. 3.1 (a): SAFETY
EN 60950-1:2006+A2:2013
Art. 3.1 (a): HEALTH
EN 62479: 2010
Art. 3.1 (b): EMC
EN 301 489-1 v2.2.0 (2017-03)
EN 301 489-24 v2.1.1 (2017-3)
Art. 3.2: RADIO
EN 301 908-1 v11.1.1 (2016-07)
EN 301 908-13 v11.1.2 (2017-07)
ROHS
IEC 50581: 2012
First Year of affixation of the CE-mark: 2016
Place of Issue: Oulu, Finland
Signature:
Tero Lepistö
Chief Executive Officer
Tosibox Oy
RED
RoHS 2.0
Date of Issue: 12.02.2018
Advertisement
Table of Contents
Summary of Contents for Tosibox Oy TB4GM2EU
- Page 1 Manufacturer: Tosibox Oy, Teknologiantie 12A, 90590 OULU, FINLAND. We hereby declare under our sole responsibility for the below listed, CE marked product: TOSIBOX 4G Modem, with product code TB4GM2EU, TB4GM2AU or TB4GM8EU, ® is in conformity with the essential requirements of the European Directives: 2014/53/EC 2011/65/EC RoHS 2.0...
- Page 2 TB4GM2 / TB4GM8 / TB4GM8EU USER MANUAL V1.5 Disable the SIM card’s PIN code query by inserting the SIM card into your mobile phone and using the phone’s settings menu. Once disabled, remove the SIM card from the phone. Insert SIM card into the modem. Make sure it is inserted correctly and falls into place contacts side up.
- Page 3 Attach the DIN rail adapter to the bottom of the modem or use the metal clips provided to mount the modem to a wall (screws not included)..or Mount the modem with attached rail adapter to the DIN rail.
- Page 4 Remove the protective caps from antenna connectors ANT 1 and ANT 2. Connect and use always BOTH antennas delivered in the sales package. If possible arrange antennas in 90 degrees angle with each other. In case where accessory antenna cables and omni-directional antennas are used (not included), have the antennas mounted in a vertical position and at least 50 cm separated.
Need help?
Do you have a question about the TB4GM2EU and is the answer not in the manual?
Questions and answers