DAVIS FLA Series Installation Instructions

FLA Series
LUMINAIRE DIMENSION:
TRUNNION ARM DIMENSION:
CAUTIONS:

Installation is to be completed by a competent licensed electrician, in accordance with these instructions and relevant
local regulations.

Electronic control equipment must not be subjected to high voltages, DO NOT MEGGER between Live and Neutral.
 All cable/conduit terminations must be installed in accordance with the designated IP rating of this product.
 Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when
subjected to vibration and or movement.
 As is the case with all electronic components, it is advisable to fit appropriate surge protection to final sub circuits.
Choose an installation place capable to withstand 10 times the weight of the product to ensure safety.

Installation Instructions
Read all instructions to prevent injury, electric shock or damage
due to fire & mechanical hazard
Model
FLA10G1xK03 124 (W) x 115 (H) x 32 (D)
FLA20G1xK03 151 (W) x 179 (H) x 35 (D)
FLA30G1xK03 151 (W) x 179 (H) x 35 (D)
FLA50G1xK03 197 (W) x 179 (H) x 35 (D)
FLA100G1xK03 254 (W) x 234 (H) x 42 (D)
FLA150G1xK03 348 (W) x 324 (H) x 47 (D)
FLA200G1xK03 348 (W) x 324 (H) x 47 (D)
Model
A
FLA10G1xK03 72
FLA20G1xK03 92
FLA30G1xK03 92
FLA50G1xK03 122
FLA100G1xK03 170
FLA150G1xK03 220
FLA200G1xK03 220
Dimension
Dimension (mm)
B C
32 8
52 8
52 8
72 8
110 10
140 10
140 10
D
8
8
8
8
10
10
10