Safety Instructions; Child Safety Lock - P&C SOPS60-1 Instructions For Use Manual

Hide thumbs Also See for SOPS60-1:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
4. Select the cooking end time by touching
or
. Next, a double beep will sound and the
current time will be displayed on the display.
5. Select a cooking function and temperature.
The oven will remain disconnected with the
and
symbols lit up. The oven is now
programmed.
6. When it is time to start cooking, the oven will
turn on and will operate for the programmed
cooking time.
7.
While cooking, the cooking time remaining
will be displayed and the
flash slowly.

safety instructions

CHIlD saFETY loCK

This function can be selected at any time while
using the oven.
To activate the function, touch and hold
key for several seconds util you hear a beep
and the
symbol appears on the display. The
clock/timer is locked.
steam Clean assist
This function makes it easy to remove grease
and other food debris that may have stuck to
the sides of the oven.
For easier cleaning, do not allow dirt to accu-
mulate. Clean the oven frequently.
pRoGRaMMING THE
sTEaM ClEaN assIsT
WaRNING
Do not pour water into a hot oven as this can
damage the enamel of the oven.
22
User's Guide
symbol will
function
®
FUNCTIoN
®
8.
When the cooking time is up, the oven will
turn off, a buzzer will sound, and the
symbol will flash quickly.
9.
Touch any sensor to stop the buzzer and
turn off the
switch on again.
10. Set the controls to the
off the oven.
You can change the remaining cooking time at
any time by touching
symbol starts to flash quickly. Now press
change the time.
If the oven is off and you activate the child
safety function, the oven will not work even if a
cooking function is selected.
If this function is activated while you are
cooking, it will only lock the electronic clock/
timer settings.
To disable the function, press
al seconds until you hear a beep.
always run the cycle on a cold oven. The
result could be affected and the varnish dam-
aged if it is run when the oven is too hot.
First remove the trays and all accessories from
the oven interior, including the tray supports.
To do this, follow the instructions in the in-
stallation and maintenance guide accom-
panying the oven.
1. With the oven cold, spread a cloth out on the
bottom of the oven.
symbol. The oven will
position to turn
or
until the
key for sever-
to

Advertisement

Table of Contents
loading

Table of Contents