Table of Contents
Advertisement
Write2Go Anywhere
2.
Please follow the instructions on the screen to calibrate to avoid any
shift inking when first time using.
Tip:
1.
You can click [Reset] to do the calibration again.
2.
After the calibration, the new conf guration would take eff ect immediately. You
do not need to reboot or reload Write2Go Anywhere program.
3.
After calibration, you will see the Writing Guide on the screen.
4.
Please make sure to apply enough pressure when writing on the
writing pad to ensure high recognition accuracy. Therefore, the
Writing Guide will help you to test your writing strength after
calibration. Please write on the writing pad, the Writing Guide will
show your writing on the screen.
5.
If you find the inking is intermittent, you need to increase your writing
strength. Please go to the [Clear and Re-write] on the bottom of the
Writing Guide and try to increase the strength slowly. If the first
writing is very clear, you may reduce the strength and find suitable
writing strength.
1-4
Advertisement
Table of Contents
