Advertisement
Figure 3
1. The handheld UV-C system should always be stored in its protective case. Before
use, inspect the system for any damage. Do not use the system if lamps or cord is
broken or appear to be damaged.
2. Put on all provided PPE and plug the system into a compatible power source and
turn system on. Direct the UVC energy in a slow, hovering motion over the surface
needing disinfection. Keep the bottom of the system parallel to the surface and
remain close to the surface for the best applied dose. See following page for dosage
information.
3. Use the Dosimeter cards provided to validate dosage and a visual indicator of UVC
delivered onto the target area.
XtraLight Manufacturing, LTD.
UV-C DISINFECTION SYSTEM USE
8812 Frey Rd. Houston, TX 77034 (800) 678-6960 F (713) 943-2818
UVCH240254WH
UV-C HANDHELD
Page 4
www.XLM.com
Advertisement
