Instructions For Use - Otonohm POWER+ Manual

INSTRUCTIONS FOR USE

CHARGING INSTRUCTIONS
1) ge the battery fully before use:
- You can charge the battery while it is on
your OTONOHM generator, or remove it
and load it wherever you want.
- Connect the connector (plug) of the
charger to the battery (socket), and then
connect the 230V power plug to an AC
outlet. You can also recharge the battery
with the car charger, or on one of the OTO
NOHM foldable solar panels equipped with
a suitable connector.
- Make sure the red LED is lit: it indicates that
the charge is effective.
- Charging stops automatically when the-
battery is fully charged: the LED lights up. -
-Time for a full recharge of the battery (sub
ject to use of the 15V / 2A mains charger
or the car charger):
• Power+ 75Wh : 2h30
• Power+ 96Wh : 3h15
• Power+ 111Wh : 3h45
If the charging time takes more than 12
hours, please contact your dealer.
2) Insert the battery into your OTONOHM
current generator.
3) Press the ON button on the dipstick to
check the battery charge level.
4) Be sure to turn off your OTONOHM ge-
nerator when not in use to conserve battery
life.
SETTING UP
Your battery integrates a smart BMS (Intelli-
gent Management System) which can, if ne-
cessary, put the battery into standby mode,
in order to preserve its autonomy.
- Your battery will automatically turn off af-
ter 5 seconds of inactivity.
- Press the ON button on your OTONOHM
generator to reactivate it.
- To force standby, press the ON button on
18 / 24