Advertisement
Quick Links
GR-7605/V2
Operation voltage
Consumption
Tx/Rx frequency range
Tx power
Duration
Housing
Ambient temperature range
Storage temperature range
Maximum relative humidity
Weight
Dimensions (L x W x H)
Warranty
Battery Type
Approvals
The GR-7605/V2 multifunctional device has 4 operating modes:
·• RSSI Tester
·• Installation Tool
·• USB Gateway
·• Spectrum Analyzer
RSSI Tester mode operates handheld, powered by internal
rechargeable battery. Installation Tool, USB Gateway and Spectrum
Analyzer modes need an active USB connection with a PC running
the "Wireless Installation Tool" software application (included in
Phos4.0).
Download the software Wireless Installation Tool from:
"link"
Features:
• 5 LED bar with dual indication (SYSTEM / RSSI)
• System status indication
• 1x Mini-USB port
• Rechargeable Ni-MH battery
• 2 hours duration
• Portable (RSSI Tester mode) or wall-mounted (other)
• Auto power-OFF function (after 10' of inactivity)
• 5h charging => 90% of full charge
Lower LED indications:
: Signal (beacon) LED (Green):
• Blinks when on USB Gateway / Installation Tool modes
• ON when on RSSI Tester / Spectrum Analyzer modes.
: RF/Rx LED (Green):
RF
• Blinks when receiving data on USB Gateway / Installation Tool modes,
• ON when RSSI Tester / Spectrum Analyzer modes.
Default settings:
• SID = 00000001
Page 1 of 5
RSSI Tester / USB Gateway
TECHNICAL CHARACTERISTICS
EN 62311:2008, EN 62368-1:2014 +AC:2015, ETSI EN 301 489-1 V1.9.2,
• RF Channel = 2 (868.150MHz)
4.9V to 5.1V (USB)
0.7W / 0.14A (max)
-40 to 70 C
Up to 95%
110 x 71 x 28 mm
3.6V / 240mAh NiMH (rechargable, non-replaceable)
ETSI EN 301 489-3 V1.6.1, ETSI EN 300 220-2 V3.2.1
868MHz
11dBm
2 Hours
ABS/PC
o
0 to 50 C
o
117gr.
2 years
USB
CHA
LOW CUT
I
II
III
RSSI TESTER
RF
923760501_09_001
SYS
IIII
IIIII
Advertisement
Summary of Contents for olympia electronics GR-7605/V2
- Page 1 3.6V / 240mAh NiMH (rechargable, non-replaceable) EN 62311:2008, EN 62368-1:2014 +AC:2015, ETSI EN 301 489-1 V1.9.2, Approvals ETSI EN 301 489-3 V1.6.1, ETSI EN 300 220-2 V3.2.1 The GR-7605/V2 multifunctional device has 4 operating modes: ·• RSSI Tester ·• Installation Tool ·• USB Gateway ·•...
-
Page 2: Powering On-Off The Device
• Battery is depleted (warning LED “LOW” will be lit previously) When power-OFF function is initiated, the LED “CUT” will be lit for 10' before shut down. The GR-7605/V2 will never power off when being connected to USB port. Button functions: •... -
Page 3: Installation Tool
“Change”. Disconnect the device from USB cable and wait 10' until it powers off. Now, when powered on, the GR-7605/V2 will be able to detect signal from that specific wireless network. -
Page 4: Usb Gateway
(20' per 100 selected). The “Phase” column indicates the progress for each unique selected device. 3. USB GATEWAY This mode sets the GR-7605/V2 as a Gateway of a Wireless Network. To enable this mode, connect the device to the master PC running Phos4.0 software via USB. -
Page 5: Spectrum Analyzer
PC via USB and run “Wireless Installation Tool” app. While the device is connected, click on “Scan” and the USB identity of the GR-7605/V2 appears on the box on the right as selected. Then click on “Connect”. When “UID” value of the device appears, click on “Spectrum Analyzer”.