Page 3
Setting Up Your Ferret Repeater Note: Configuration is required to pair your Ferret Repeater with your Ferret Sweeps camera prior to use. Plug the Repeater into a power bank to power up. WiFi indicator LED will be green. Open the WiFi Settings on your smartphone or tablet and select the...
Page 4
Once connected, open an internet browser on your smartphone or tablet and enter the address 10.10.10.254. The Ferret Repeater Configuration Page will open up. Switch on your Ferret Sweeps camera. Scroll to the bottom of the page and tap SCAN NOW.
Page 5
Find your Ferret camera’s SSID “Ferret-WiFi-XXXX” and tap “Select”. In this example, the Ferret camera’s SSID is “Ferret-WiFi-DC21” Tap “Next”...
Page 6
Tap “Confirm” Wait for the "Configuration Successful" message. 10. After approximately 30 seconds, the green WiFi Indication LED will turn Blue confirming your Ferret Repeater has been configured.
Page 7
12. Open your Ferret WiFi App. Your phone is now connected to your Ferret camera via the Ferret Repeater. NOTE: The Ferret Repeater will only need to be reconfigured if you need it to connect to a different Ferret camera.
Warranty Your FERRET Repeater comes with a 12-month replacement warranty. In the unlikely event that your FERRET Repeater develops a fault within 12 months of purchase, please email support@cableferret.com or return it your place of purchase with proof of purchase.