Page 1
User Manual Version 2.0 2020/10 IEC-22A2 Touch Computer...
Page 2
TES reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of TES to notify any person of such revisions or changes.
Page 3
Compliance Information For FCC (USA) This equipment has been tested and fund to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. There limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Page 4
Renseignements relatifs à la conformité Pour la FCC (États-Unis). Ce matériel a fait l’objet d’essais qui ont déterminé qu’il respectait les limites d’un appareil de classe A selon la partie 15 des règlements de la FCC. Ces limites sont établies pour assurer une protection raisonnable contre les parasites nuisant à...
Page 5
Usage Notice Warning - To prevent the risk of fire or shock hazards, and do not expose the product to moisture. Warning - Please do not open or disassemble the product as this may cause electric shock. Warning - Power cord shall be connected to a socket-outlet with earthing connection.
Page 6
Avis d’utilisation Mise en garde — Pour prévenir les risques d’incendie ou d’électrocution, ne pas exposer le produit à l’humidité. Mise en garde — Prière de ne pas ouvrir ou démonter le produit, car cela pourrait entraîner l’électrocution. Mise en garde – Le cordon d’alimentation doit être branché à une prise pourvue d’une mise à...
1.1 Overview The IEC-22A2 series is a thinner 21.5" touch computer that offers a unique screw less design with expandability and flexibility, making expansion and accessory installation much easier. The versatility of IEC-22A2 series is an exceptional choice for applications in all business sectors, especially in the retail market.
Page 10
Internal IO Ports 1 x connector (5V/0.5A) (inside plastic cover) OS Version Android 9.0 or later Operation Temp. 0°C~40°C Storage Temp. -20C to 60C Operation Humidity 20~80%, Non-Condensing Storage Humidity 10~90%, Non-Condensing LCD Touch Panel Size 21.5” TFT LCD Brightness Typical 250 cd/m ;...
1.5 Interface Connectors 12V DC in Pin # Signal Name Pin # Signal Name RJ45 for LAN Pin # Signal Name Pin # Signal Name TP1+ TP1- TP2+ TP3- TP3+ TP2- TP4+ TP4- Function Color Left Active Yellow (Blink) Right 10M/100M/1000M Green USB3.0...
Page 13
USB-C Pin # Signal Name Pin # Signal Name SSTXp1 SSRXp1 SSTXn1 SSRXn1 VBUS VBUS SBU2 SBU1 VBUS VBUS SSRXn2 SSTXn2 SSRXp2 SSTXp2 HDMI Pin # Signal Name Pin # Signal Name TMDS Data2 TMDS Data2+ Shield TMDS Data2- TMDS Data1+ TMDS Data1 TMDS Data1- Shield...
12Vdc, 4A minimum. (complied with LPS or PS2) Tma = 40 degree C minimum, and the altitude of operation = 3048m minimum. If it needs further assistance with purchasing the power source, please contact to TES for further information. Mise en garde! Cet appareil est conçu avec une alimentation de courant CA, d’une tension...
2.1 About VESA Mount The IEC-22A2 series conform to the “VESA Flat Display Mounting Interface Standard” which defines a physical mounting interface for touch computer, and corresponding with the standards of touch computer mounting devices, such as wall-mounted. The VESA mount is located on the back of this unit.
Page 17
Mise en garde! Sélectionner les vis d’origine de TES! La distance entre la surface du couvercle arrière et le bas de l’orifice de la vis est de 8 mm. Utiliser quatre vis M4 de 8 mm de diamètre pour le montage de votre moniteur.
2.2 Power On / Off Switch Power On/Off Switch Function Description Power on Press the power button 2 sec Press the power button to enter sleep mode, and press again to Sleep resume from sleep Power off Press the power button 2 sec and click power off.
2.4 Optional Accessory Installation Note: Please install/ dismantle the product when the computer system is in the shutdown state. 2.4.1 Install the Stand Module Place stand module on back of touch computer and align the screw holes. Install the four M4 screws to fasten the stand.
2.4.3 Install the Cables 2.4.3.1 Cable Organizer Step 1: Pull down the cable cover for cables installation. Step 2: To fit the plugs Step 2 Step 1 Step 3: To assemble the cable cover. Step 4: Driving a screw to fix cable cover (The cable can be fixed above or below the cable cover) Step 4 Step 3...
2.4.3.2 Stand Module 2.4.4 Install the Camera Module Camera Module max. 19g Step 1: Remove the side cover. Step 2: Connect the camera module cable to the touch computer. Step 3: Install the two M3 screws to fasten the camera module. Step 1 Step 3 Step 2...
2.4.5 Dismantle the Camera Module Step 1: Loosen the screws. Step 2: Remove the camera module cable from the touch computer. Step 3: To assemble the side cover. Step 3 Step 2 Step 1 2.4.6 Install the MSR Module MSR Module max. 62g. Step 1: Remove the side cover.
Page 25
Step 3: The metal bracket hook into the gap between cover glass and bezel. Step 4: Install the two M3 screws to fasten the MSR module. Step 4...
2.4.7 Dismantle the MSR Module Step 1: Loosen the screws. Step 1 Step 2: Remove the MSR module cable from the touch computer. Step 3: To assemble the side cover. Step 3 Step 2...
Declaration of the Presence Condition of the Restricted Substances Marking 設備名稱:觸控電腦 型號(型式):IEC-22A2 Equipment name: Touch Computer Type designation (Type): IEC-22A2 限用物質及其化學符號 Restricted substances and its chemical symbols 單元 Unit 六價鉻 多溴聯苯 多溴二苯醚 鉛 汞 鎘 Cadmium Hexavalent Polybrominated Polybrominated Lead...