Page 3
Additional Warnings and Precautions CAUTION Warning: To reduce the risk of electric RISK OF ELECTRIC SHOCK DO NOT OPEN shock, do not remove cover (or back). • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH ATTENTION No user-serviceable parts inside. Refer RISQUE D' ÉLECTROCUTION NE PAS OUVRIR WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Table of Contents Get to Know Your Turntable–5 Features–5 What’s in the Box?–5 Top–6 Rear–6 Controls–7 Let’s Get Started–8 Attach the Counterweight–8 Power –9 Loading a Record–9 Connecting to a Bluetooth Speaker–10 Connecting to External Speakers–11 Hints and Tips–12 Anti-Skating–12 Pitch Adjustment–12 Stylus Replacement–12 Usage Tips–12...
Get to Know Your Turntable Features • Plays 33, 45, and 78rpm records • Built-in Bluetooth transmitter for connecting to Bluetooth speakers • Built-in RIAA preamp • Lift and return action of the tone • RCA stereo audio output arm at the end of a record •...
Page 6
Get to Know Your Turntable Rear 1. 45rpm Adapter 7. Tone Arm Lift Switch 13. Bluetooth ON/OFF 2. Platter 8. Tone Arm Lock 14. RCA Line Out 3. Tone Arm 9. Pitch Adjustment 15. Phono/Line Out 4. Cartridge & Stylus 10.
Page 7
Controls 1. Counterweight Adjustment: Turn to adjust the amount of weight placed on the record by the stylus. 2. Anti-Skating Adjustment: Turn to adjust the inward tracking of the stylus on the record. 3. Pitch Adjustment: Turn to fine tune the speed of the platter as it spins.
Let’s Get Started Attach the Counterweight The counterweight controls how much pressure the stylus will put on a record. If there is too much pressure, the sound will become distorted. If there is too little pressure, the stylus will skip out of the grooves on a record. The tone arm should be balanced without the protective cover over the stylus, as it will affect the weight.
Power Plug the DC power adapter into a standard wall outlet and the DC Power Input on the unit. Loading a Record • Place your record on the platter, aligning it with the center spindle. • Set the speed selector dial to match your record type - 33, 45, or 78. If you are playing a 45rpm record, be sure to place the 45rpm adapter on the platter first, so that it is between the platter and the record.
Connecting to a Bluetooth Speaker • Start by enabling Pairing Mode on the Bluetooth Speaker you want to use. Before beginning the pairing process, be sure no other devices are connected to the speaker. • On the turntable, turn Bluetooth Mode ON by adjusting the switch on the back of the unit.
Connecting to External Speakers • Use an RCA audio cable to connect to a pair of external speakers. Connect the Line Out ports on the turntable to the corresponding color-coded ports on the speakers. • Set the selector switch on the back of the turntable to Line Out to send audio to the speakers.
Hints and Tips Anti-Skating The Anti-Skating dial adjusts the inward tracking of the tone arm on the record. Usually, the dial should be left in its lowest setting. However, if the turntable is experiencing excessive skipping as the record plays, increase the anti-skating effect in increments of 1 using the dial.
Need help?
Do you have a question about the 100006556 and is the answer not in the manual?
Questions and answers