Download Print this page
Light-For-Me 3XML Alexandra User Manual

Light-For-Me 3XML Alexandra User Manual

Rca heads

Advertisement

Quick Links

Please read the following manual carefully before the first use and keep it for future reference. Failure to follow this
user's manual may lead to malfunction and / and damage to the flashlight.
Scuba diving is treated as an extreme sport and requires proper training and certification. Using scuba equipment
by an untrained and inexperienced person without proper certification may cause health damage and even risk of
death.
Product list
These operating instructions apply to the following products:
3XML Alexandra
Detailed technical data of the above heads can be found at www.light-for-me.global
Power source
Light For Me heads can be powered by light-for-me ACCUs with compatible RCA cable entry point. A complete list of
available accus and information on the burning times of each head can be found at www.light-for-me.globalt
Before the dive
Check the head's visual condition - see if
the front glass is not chipped or broken.
Check the cable - if it is cut or damaged,
do not dive! Check the cable's RCA plug -
it should be clean and dry, remove any
dust or sand with a clean tissue (see
photo on the right).
LIGHT FOR ME
user's manual
RCA Heads
4TEC
NW4
Cable's RCA plug
Clean and dry this part
before connecting the cable
to the accu and after
disconnecting it
7XPE
1/3
7XML
NW7
Rotating nut

Advertisement

loading
Need help?

Need help?

Do you have a question about the 3XML Alexandra and is the answer not in the manual?

Questions and answers

Summary of Contents for Light-For-Me 3XML Alexandra

  • Page 1 Detailed technical data of the above heads can be found at www.light-for-me.global Power source Light For Me heads can be powered by light-for-me ACCUs with compatible RCA cable entry point. A complete list of available accus and information on the burning times of each head can be found at www.light-for-me.globalt Before the dive Cable’s RCA plug...
  • Page 2 Connecting to the accu Before connecting the cable to the Puch the plug into the RCA port until Twist the rotating nut to the end. RCA port, slide back the rotating nut it reaches the end. Check it again before entering the and carefully place the pluginto the water.
  • Page 3 Troubleshooting Problem Solution Charge the ACCU according to the instructions provided. Clean the ACCU’s Light head does not switch on. connection port and cable RCA plug. One /some of the LEDs is not The light head needs to be serviced. The LED is damaged and/or burnt. working.

This manual is also suitable for:

4tecNw47xpe7xmlNw7