Lumel ATS Quick Start Manual

ADAPTER ATS

1. ApplicAtion And construction of the AdApter

ATS adapter is designed for mounting of panel instruments in
accordance with IEC 61554 DIN on TS35 DIN EN 60715 rail or
for transducers of P18 series. The Construction (Figure 1 and 2)
is made of galvanized steel and consists of five parts: the main
sheet, two hooks and two springs.
95.9
Figure 1. View of the ATS mount on the DIN rail TS35.
for din rail ts35
user's manual
Figure 2.View of the ATS mount on the DIN rail TS35 -
adapter for P18 transducers.

2. AdApter set

The set is composed of:
- adapter ATS
- user's manual

3. fixing

Panel meter should be fixed in the mounting hole of the ATS
adapter (figure 2a).
a) fixing the panel meter into the adapter
1 pc.
1 pc
.
screw clamps