Greentrees Hydroponics MULTI FLOW HYDROPONIC SYSTEM Instructions Manual page 5

Layout the pots in rows in your grow room and connect them
together with the tubing and tee fittings. You can use the elbows for the
end. Lubing the grommets with a small amount of water will make it
easier to insert the fittings.
Connect the first pot on each row to one of the connectors at the
base of the Controller.
Use the Barbed Fitting End Caps to plug any unused outlets in the
base of the Controller.
The tubes connecting the pots should lay as flat as possible and
should not be kinked. Any kinks or high spots will reduce the flow of
nutrient.
We recommend expanded clay media for the system, Hydrocorn,
Hydroton or similar brands.
You should wash the media to keep any fine debris from clogging
the system. The easiest way to do this is by removing the upper pots, fill
them with media and run water over them.
Page 5