Troubleshooting - NETGEAR Meural MC315 Quick Start Manual

Contents
Canvas
Wall mount Anchors Screws
Power Adapter
(varies by region)
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
Regulatory and Legal
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Overview
Fold out the stand.
Landscape or portrait.
Connect power supply
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134,
USA
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non‑NETGEAR trademarks are used for reference
purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland

Troubleshooting

If you are having trouble with your canvas, try reseting
it to the factory configuration:
1. Find a pen, paperclip, or other slim object to
press the reset button with.
2. Disconnect the power cord from your canvas.
3. Locate the small, recessed reset button near
the power connector.
4. Using the object from Step 1, firmly press and
hold the reset button.
5. While continuing to hold the reset button,
plug the power cord back into your canvas.
6. Wait twenty seconds, then release the reset
button.
The Meural logo remains on the screen for a few
seconds, then the canvas automatically reboots.
Reset button
Power connector