Download Print this page

ConnectGear CONNEkT Install Manual

Wifi wall socket

Advertisement

Quick Links

We recommend using a qualified electrician for installation. Please ensure that these
instructions are read carefully and fully understood before commencing with installation.
IMPORTANT SAFETY WARNINGS
CONTACT WITH MAINS ELECTRICITY CAN CAUSE SERIOUS INJURY OR DEATH.
Do not open the back of WiFi CONNEkT Wall Socket
as this will void your warranty.
Do not store or install this product in areas of high humidity.
Do not insert any foreign objects into the openings of the
WiFi CONNEkT Wall Socket.
Do not cover or block the holes on the rear of the unit as
they serve as ventilation.
Do not use water or substances such as paint thinners, alcohol or
strong cleaning solutions to clean the WiFi CONNEkT Wall Socket
due to risk of damage to the plastic, electrocution or fire.
Do not use the WiFi CONNEkT Wall Socket with a power
supply different than 220-240 volts 50 Hz AC.
To prevent fire hazard always use cable of the correct rating,
size & type for the installation.
Suitable for indoor use only.
If the WiFi CONNEkT Wall Socket becomes damaged isolate
all electrics and seek the advice from a qualified electrician.
SAFETY APPROVALS
EN300328
EN50412
EN301489
EN55032
EN62311
EN61000-3-2
EN50561
EN61000-3-3
BS5733
Complies with UK Building
Regulations 2010 approved
document M, Volume 2, Section 4.
All In One Socket Starter Kit
WIFI
INSTALLATION REGULATIONS
UNITED KINGDOM
The WiFi CONNEkT Wall Socket must be installed in accordance with the
latest edition of the IEE Wiring (BS 7671) Regulations & Building Regulations.
REPUBLIC OF IRELAND
The WiFi CONNEkT Wall Socket must be installed in accordance with the
ETCI National Rules for Electrical installations.
REGISTER YOUR PRODUCT
To register your product please visit: http://groupgear.co.uk/WiFiConnektReg.asp
Connekt Gear is a brand of Group Gear Ltd
This Install Guide is for the WiFi CONNEkT Add-On Sockets.
For the full Install & Set-up Guide please visit: www.groupgear.co.uk
GROUP GEAR LTD
Tel
• 0121 503 0666
Email
• technical@groupgear.co.uk
Skype
• technical@groupgear.co.uk
Website
• www.groupgear.co.uk
Find us on YouTube • WiFi CONNEkT
USB
Network
Powerline
Charging
Ports
Technology
Install
Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the CONNEkT and is the answer not in the manual?

Questions and answers

Summary of Contents for ConnectGear CONNEkT

  • Page 1 • Do not open the back of WiFi CONNEkT Wall Socket The WiFi CONNEkT Wall Socket must be installed in accordance with the latest edition of the IEE Wiring (BS 7671) Regulations & Building Regulations. as this will void your warranty.
  • Page 2 INSTALLATION INSTRUCTIONS 1. Switch off the mains power supply in the consumer unit (fuse box). 2. If retro fit remove the existing wall socket from the wall. 3. Prepare the mounting surface area clearing away any plaster debris and dust from the inside the mounting box. 4.