Download Print this page

Habitat Mell 817633 Manual page 2

Desk

Advertisement

Available languages

Available languages

EN
This manual contains important information that should be kept for future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the plastic bags out their reach. The small parts pose a
choking hazard.
Materials
Table top: medium density fiberboard (MDF) lacquered.
Feet: steel powder coated.
Assembly Instructions
Before beginning assembly, identify all components using the manual.
In order not to lose components, do not throw the package before completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where it will be installed.
Assemble on a clean, flat surface.
Over time, the fasteners may lose their effectiveness. Periodically check for loose screws. Retighten if necessary.
Recommendations for use
This product was designed for indoor use only.
Check the proper assembly before each use.
Do not sit on the product.
Do not stand on the product.
Les produits à base de bois, de panneaux de particules, peints, vernis et/ou laqués peuvent dégager une odeur à
l'ouverture. Cette odeur disparaît après quelques semaines si la pièce est correctement aérée.
Maintenance
Dust regularly with a dry cloth.
Do not use abrasive products.
To avoid the appearance of marks, do not leave any object immobile for more than 2 months. Avoid placing this furniture
in the immediate vicinity of a radiator or air conditioner. Heat and moisture can cause cracking or deformation.
Wooden part
In order not to damage the surface, it is recommended not to deposit a hot or humid object directly on it.
Do not use magazines or newspapers as a trivet. The ink used may leave traces that can permanently stain the surface
of the furniture.
Sponge up spills immediately with a cloth. Then wipe the surface with a clean, dry cloth.
The use of special products for furniture is not recommended or even necessary.
Maintain with movements in the direction of the wood fibers.
Metal part
Clean with a soft, damp cloth. Then wipe with a clean, dry cloth.
Keep the label with lot number, it may be useful in case of complaint.
If you have any comments or suggestions regarding this product, assembly instructions or service received, please
enquire at your nearest store or contact us on our website at: www.habitat.eu or write to this address: HABITAT – 70
AVENUE VICTOR HUGO 93300 AUBERVILLERS FRANCE
Mell – 06/2018
1

Advertisement

loading