Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SaMASZ P10-1200
Summary of Contents for SaMASZ P10-1200
- Page 1 SaMASZ Sp. z o.o. tel. (+48) (85) 664 70 31 ul. Trawiasta 1 fax (+48) (85) 664 70 41 16-060 Zabłudów e-mail: samasz@samasz.pl Polska www.samasz.pl OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 IN325EN000 Translation of the original Serial No.: 17-08-2016 operator’s manual Edition No.
- Page 2 Well-proven design with thousands of machines in regular use in many countries and quality materials ensure high durability and reliability of SaMASZ tedders. We congratulate you on the purchase of your new SaMASZ tedder and wish you much pleasure and the very best work results through the years to come.
-
Page 3: Table Of Contents
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 Contents IDENTIFYING THE MACHINE ..................... 4 INTRODUCTION ........................4 PROPER USE ......................... 5 3.1. Technical data ..........................5 3.2. Design of trailed rotary tedder ......................6 3.3. Standard equipment and spare parts ....................7 SAFETY ADVICE ........................ -
Page 4: Identifying The Machine
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL 1. IDENTIFYING THE MACHINE Data plate (Fig. 2) is mounted to the tedder’s main frame in the place shown below in Fig. 1. Fig. 1. Data plate place Fig. 2. Data plate Data plate includes:... -
Page 5: Proper Use
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 3. PROPER USE Rotary tedder is designer to tedding cut forage and dry hay in order to accelerate their drying process. WARNING! Use of the tedder for other purposes than the above mentioned is forbidden. -
Page 6: Design Of Trailed Rotary Tedder
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL 3.2. Design of trailed rotary tedder Overview of 10-rotary tedder is provided in Fig. 3. Inclined position Horizontal position Transport position 12 16 Working position Fig. 3. Parts of trailed 10- rotary tedder 1 – Rotary road wheel - extreme 10 –... -
Page 7: Standard Equipment And Spare Parts
The articulated telescoping shaft should also be lubricated before and after longer periods of disuse. PTO shafts of other brands with equivalent parameters could be used after SaMASZ permission. 4. SAFETY ADVICE 4.1. Safety rules and regulations Operation without safety guards as well as with the damaged guards is not allowed. - Page 8 P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL Front axis of the tractor should be weighted to keep the balance. If need be, use front wheel weights. ❑ Tedder should not be operated when the tractor-tedder set is not balanced. ❑ Any operation with the hydraulic lift lever should be done from the operator’s seat; DO NOT move ❑...
-
Page 9: Qualifications Of Operator
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 Hydraulic hoses should be periodically checked and if any damage occur or they expire, replace ❑ with new ones. Expiry period should not exceed 5 years. Never use scotch tape to repair hydraulic hoses. -
Page 10: Conditions Of Connecting Tedder With Vehicle
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL 4.3. Conditions of connecting tedder with vehicle Prior to the mounting operation, check whether the vehicle's and the tedder's hitch categories are ❑ compatible and make sure that vehicle's hitch load is adequate for the machine aggregated. -
Page 11: Working Parts
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 Fig. 5. Places of tedding the tedder, location of centre of gravity 4.5. Working parts Before operating the tedder check rotors’ and tines’ condition. ❑ Worn or damaged tines should be immediately replaced with new ones. -
Page 12: Residual Risk
Useful life for hydraulic hoses is 5 years from their production date. ❑ 4.8. Residual risk Despite the fact, that company SaMASZ – the manufacturer of the tedder takes the responsibility for design and manufacturing of the tedder, in order to eliminate dangerous situations, certain risk during tedder operation is unavoidable. -
Page 13: Residual Risk Evaluation
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 When describing residual risk, the tedder is treated as a machine, that up to the moment of its putting in motion it had been designed and manufactured according to technology level actual till the day of tedder’s manufacture. - Page 14 P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL N-07 N-11 N-09 N-49 Operating is forbidden when Lubrication points WARNING! rotating parts! Never stand near tractor’s 3- any person is within the point linkage while steering danger area tractor’s lift of 50 m...
- Page 15 OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 N-103 N-104 N-196 Hearing protection Foot protection must be worn must be worn N-15 N-62 N-162 N-03; N-04; N-06; N-07 N-09; N-50; N-117; N-167 N-220 N-168; N-183 N-29 N-01 N-49 N-15; N-62; N-162 N-52; N-100; N-101 N-102;...
-
Page 16: Use Of Tedder
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL 5. USE OF TEDDER 5.1. Attaching the tedder to the tractor Couple the tedder with the tractor using the three-point linkage bar (1) (Fig. 7) and the bar pin (2), which must be secured with the cotter pin. Then connect the four hydraulic hoses to the two hydraulic pairs (3) of the tractor. -
Page 17: Preparing The Tedder For Transport
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 In order to select the right control cylinders for the machine assemblies: 1. arm folding cylinder or tilt cylinder - select the B2 button, 2. wheel rotation cylinder or tarpaulin sheet cylinder (the B3 button). - Page 18 P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL In order to prepare the tedder for transport: a) Switch off the PTO drive! Always switch off the PTO drive of the tractor before moving the machine to the transport position. Before the operation, it is necessary to make sure that the tedder rotors have come to a standstill.
- Page 19 OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 WARNING! Failure to fold in the tarpaulin sheet will cause its damage when folding the machine into the transport position. d) Fold the machine with the main central cylinder until the side arms are parallel to the direction of...
- Page 20 P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL WARNING! Wheel tracks, muddy terrain or steep slopes may prevent the tedder from being folded. Folding the tedder on this type of ground can cause damage to the machine. WARNING! When folding the tedder, ensure that there are no bystanders within the folding radius of the tedder arms.
- Page 21 OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 For correct adjustment of the ground wheels to the transport position, follow the instructions below (Fig. 12): 1. Rotate the steered wheels of the tedder to the position parallel to the direction of travel and the tedder bars.
-
Page 22: Preparing The Tedder For Transport On Public Roads
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL 5.4. Preparing the tedder for transport on public roads To meet safety precautions concerning transport on the public roads the tedder should be equipped with two warning plates T (Fig. 17). The plates are in standard equipment of the tedder. -
Page 23: Mounting Pto Shaft
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 WARNING! If the vibration dampers are tightened too much, they may become blocked and the ground wheels may become difficult to position in the direction of travel. This may cause damage to the machine. After each adjustment of the dampers, make sure that the rotating wheels are positioned in the direction of travel. -
Page 24: Switching From Transport To Working Position
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL WARNING! If need be, shorten the PTO shaft according to its operator’s manual given by the shaft’s manufacturer (Fig. 20). Fig. 20. Instruction of PTO shaft shortening WARNING! PTO shaft’s end with friction clutch should be mounted on tedder’s side. -
Page 25: Preparing The Tedder For Work
5.7. Preparing the tedder for work WARNING! During storing of the machines in company SaMASZ the cylinders are protected by special grease in order to secure them against weather which may cause their premature wear. Before starting the operation excess grease should be removed from the cylinders. - Page 26 P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL tilt the tedder with the tilt cylinder until the tilt cylinder is locked, ❑ if necessary, adjust the angle with the height of the H beam (Fig. 23b) so that the distance between ❑...
- Page 27 OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 WARNING! It is not recommended to set a 14° tilting angle in the wheel systems because of the possibility of collision between the ground wheel and the working springs in the transport position. In order to make it easier for the operator to obtain the right tilt angle after levelling the machine, the tedder has been equipped with a tilt cylinder lock (Fig.
-
Page 28: Operation
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL WARNING! The tilt angle lock can only be adjusted in the horizontal position. WARNING! It is only possible to maintain a constant tilt angle of the machine (A1) if the tractor bar height (H) is constant (Fig. 23). -
Page 29: Removing Clogging And Jams
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 Folded windrow curtain Unfolded windrow curtain Edge of the field Fig. 25. Tedding on the edge of the field 5.9. Removing clogging and jams When operating the tedder pay attention to variable conditions on field, which may influence the tedder clogging and jams, such as: terrain unevenness, height and density of grass as well as other objects in the grass (stones, branches, piles of soil). -
Page 30: Dismounting Machine From Tractor
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL 5.10. Dismounting machine from tractor WARNING! When dismounting, make sure there is no person in between the tedder and the tractor. To dismount the tedder from the tractor: set the machine onto an even, stable ground, ❑... -
Page 31: Daily Maintenance
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 WARNING! Use only the tines recommended by the manufacturer. WARNING! Before you change the tines check rotor turns (Fig. 27). 6.2. Daily maintenance Every day after work please carry out the following maintenance: check all visible units and parts and their connections; tighten all loose bolts and nuts and replace ❑... -
Page 32: Lubrication
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL Tab. 3. Torque values for bolts In the absence of specific torque values, the following chart can be used as a guide to the maximum safe torque for a particular size and grade of fastener. There is no torque difference for fine or coarse threads. -
Page 33: Main Gears
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 Fig. 29. Inspection points and oil change points To replace oil in gears: Prepare an adequate tank for the used oil to be disposed, ❑ Open fuel cap B and the drain plug C (Fig. 29), ❑... -
Page 34: Joints
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL To replace oil in main gear: Prepare an adequate tank for the used oil to be disposed, ❑ Open fuel cap B and the drain plug C (Fig. 30), ❑ Drain oil from the gear, ❑... -
Page 35: Risks Present When Lubricating
OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200 7.5. Risks present when lubricating If risk of splashing is present, make sure to wear protective eyewear with side guards. ❑ When lubricating protect eyes and skin against contact with the substance. Therefore use adequate ❑... -
Page 36: Disassembly And Withdrawal From Use
P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL 9. DISASSEMBLY AND WITHDRAWAL FROM USE 9.1. Repair Before starting any repair or service the tedder should be cleaned and any grass or dirt removed.Carefully check nuts and bolts for correct tension and the pins for wear. Replace if necessary. -
Page 37: Warranty Terms
2. The warranty period is for two years from the date of sale to the purchaser, stated above. 3. Any repair which is subject to warranty should be carried out by an authorised SaMASZ dealer. Upon completion of the repair the dealer must submit a warranty claim within 14 days. -
Page 38: Warranty Repairs Record
The manufacturer reserves the right to introduce changes in construction. WARNING! Company SaMASZ is working constantly on development of all types and models. That is why, there is always a possible change of form, equipment and technology of delivered products. Any claims arising from data, drawings and descriptions included in this operator’s manual and spare parts list cannot be laid. - Page 39 OPERATOR’S MANUAL TRAILED ROTARY TEDDER P10-1200...
- Page 40 P10-1200 TRAILED ROTARY TEDDER OPERATOR’S MANUAL SaMASZ Sp. z o.o. tel. (+48) (85) 664 70 31 ul. Trawiasta 1 fax (+48) (85) 664 70 41 16-060 Zabłudów e-mail: samasz@samasz.pl Polska www.samasz.pl...
Need help?
Do you have a question about the P10-1200 and is the answer not in the manual?
Questions and answers