Table of Contents
Advertisement
Quick Links
FAQ
Q: Cannot connect to camera.
A: 1. Please ensure the camera is charging.
2. Make sure the camera and the monitor are within the effective distance.
3. Please confirm if the antenna is tightened
Q: The video changed to unclear.
A: 1. Please try to remove the camera near to monitor.
2. Please clear the obstacle between camera and monitor.
Q: The baby monitor has some noise.
A: 1. The camera and monitor may be too close. Move them further apart.
2. Please adjust the angle of the antenna to minimize wireless interference.
Q: How long this monitor can standby?
A: After charged fully, the monitor can standby about 12 hours.
Q: Can I hear my baby's voice when turn off the screen?
A: Yes. You should turn on VOX, and it will wake up the screen if a loud sound
is detected.
Q: Picture is black and white?
A: The Night Vision Mode will be activated if the camera worked in a dark
environment. Turn on room light can force monitor out of night vision mode.
14
QUICK START GUIDE
5.0 Inch Video Baby Monitor
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Germid BC50
- Page 1 Q: Cannot connect to camera. A: 1. Please ensure the camera is charging. 2. Make sure the camera and the monitor are within the effective distance. 3. Please confirm if the antenna is tightened QUICK START GUIDE Q: The video changed to unclear. A: 1.
- Page 2 WARNING 1. Strangulation Hazard - Children have strangled in cords. Keep this cord out of the reach of children (more than 3 feet away). 2. Never Place the Camera of Cord in or Near Crib or Playpen. Secure the cord at least three feet away from crib or playpen.
- Page 3 Step 1: Charge the monitor by connecting the Power Adapter to the monitor and a socket. The monitor takes about 10 hours to be fully charged (Enlarged 6000 mAh battery), and it lasts about 12 hours. BC50 Camera BC50 Monitor Power Adapter x2 QUICK START GUIDE 5.0 Inch Video Babay Monitor...
- Page 4 OVERVIEW 10 11 1. Camera Unit 1. Light indicator 2. Menu/Back: Press to enter menu page in the monitoring image or press as a Back button in menu page. 3. Lullaby/Confirm: Press to play lullabies in the monitoring image 1. Light sensor 5.
- Page 5 DELETE CAMERAS MENU SETTINGS 1. Press “ “ to enter the menu page. 2. Select “ “ , then press ”OK”. PAIR THE CAMERA Choose ” “ and press ”OK”. You do not need to pair it again unless the Camera Unit loses its link with the Monitor Unit or pair to a new Camera Unit.
- Page 6 VOX SETTING When you have more than 4 cameras at most can be connected to one monitor. 1 Camera Unit paired (For example 4). The following display modes are The monitor has a voice operated switch, also known as VOX. If you enable this available.
- Page 7 SYSTEM SETTINGS Factory Reset This function is to set System Date & Time, LCD Auto Off, and Factory Reset. Factory Reset 1. Select “ “, press ”OK”. 2.Confirm “YES” to reset. System Date & Time 1. Press “ “ to enter the menu page. 2.
- Page 8 BRIGHTNESS SETTING FCC STATEMENT 1. Press “ “ to enter the menu page. 2. Press ” “ and ” “ to decrease or Choose ” “ and press ”OK”. increase screen brightness. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the BC50 and is the answer not in the manual?
Questions and answers