Unpacking Your Water Dispenser; Getting To Know Your Water Dispenser - Sunbeam 0282 Manual

UNPACKING YOUR WATER DISPENSER

ongratulations, you have acquired a high quality SUNBEAM
C
many extra features, that you will find convenient to use. Multi-temperature capability allows you to enjoy a cool, hot
or room temperature drink. It will provide you with many years of trouble free use, by following the simple instructions
contained in this manual. Please take the time to read it carefully.
The refrigeration compressor has very sensitive mounts inside of its welded shell in order to provide quiet
running. Improper handling may damage the compressor.
1) Wipe it clean if necessary.
2) Find a location for your water dispenser that is protected from direct sunlight and other sources of
heat. Place the water dispenser on a level surface. The unit should be placed flatly. Make sure that there
are at least 6"/15cm of space between the back of your water dispenser and the wall. Keep a minimum
distance of 2"/5cm on each side of your water dispenser free. It is recommended to keep the machine
away from furniture and other appliances to avoid unexpected water damage. Don't move the unit
roughly or incline more than 45°. For hot and cold water dispensing, please place unit in a well
ventilated area.
3) Do NOT plug your water dispenser into the power outlet yet! The switches at the back should be in the
"OFF" position. Read the instructions first. M a ke sure drain plug at back of unit is tightly fastened.
This water dispenser is for indoor use only.
Room temperature should not exceed 97°F / 36°C.

GETTING TO KNOW YOUR WATER DISPENSER

®
For the cold water, there is a 304 stainless steel water cooling tank.
Refrigeration compressor is quiet and durable.
For the hot water there is a 304 stainless steel heavy duty hot water tank with an external heater. It is suitable for
mineral water.
The power cord has a grounded plug. Please make sure that your outlet is properly grounded.
Integrated No-Spill Receptacle System for added hygiene and convenience.
Two power switches on the back of the water dispenser: blue is for cooling and red is for heating.
The front panel has three indicator lights: yellow for power, red for heating and green for refrigeration.
There are three push buttons on the front : hot (left), room temperature (middle) and cold (right).
The hot water tap push button has a child resistant hot water guard. To operate it, hold the red device to the left
while pushing the tap handle.
Easy to clean deep drip tray.
Convenient detachable base.
- 3 -
No. 0282
Water Dispenser for bottled water. This unit is packed with
6 " / 1 5 c m
m i n